Civil and Architectural Engineering
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  1. Abdallah, H.S. and Sohel, K.M. 2018. Design of Protective Barrier Against Impact. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  2. Ahsan, R., Sohel, K.M., Khadem, M. and Al-Mamun, A. 2018. Using Mobile Phone in Classroom Teaching and Learning for Engineering Students: A Case Study. In: Proceedings of the 28th Arab Engineering Conference, Muscat, Sultanate of Oman, 11-13 December, 2018.
  3. Al Azri, H., Al Shabibi, B., Al-Busaidi, M. and Alalouch, C. 2018. Spatial DNA of Traditional Houses in Oman.   In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  4. Al-Abri, B., Al-Mamun, A., Baawain, M.S. and Al-Harthi, I. 2018. Electricity Production and Metal Recovery from Landfill Leachate using Microbial Fuel Cell. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  5. Al-Alawi, M., Bouferguene, A. and Mohamed, Y. 2018. Integrating Weather in Modelling Earthmoving Mining Operation using Distributed Simulation with HLA Standards. In: Proceedings of the 30th European Modeling and Simulation Symposium (EMSS 2018), Budapest, 17-19 September 2018.
  6. Alalouch, C., Al-Hajri, S., Naser, A. and Alhinai, A. 2018. What is Happing in Al-Maabilah? The Hidden Dimensions of Urban Sustainability. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  7. Al-Amri, S., Hassan, H.F., Al-Shamsi, K. and Al-Jabri, K. 2018. Performance Evaluation of Hot Mix Asphalt Concrete Containing FeCr Slag as Aggregate. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  8. Al-Harthy, A. and Hassan H.F. 2018. Civil Engineering Body of Knowledge for the 21 Century and ABET Program Accreditation. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  9. Al-Hashmi, A. and Mohamedzein, Y. 2018. Laboratory Characterization of Expansive Soil from Adam. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  10. Al-Hinai, S. and Al-Mamun, A. 2018. Simultaneous Electricity Production and Organics Removal from a Mixture of Landfill Leachate and Sewage using Microbial Fuel Cell.   In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  11. Al-Mamun, A. and Baawain, M.S. 2018. Bio-Cathode Microbial Fuel Cell for Practical application of Sewage Treatment and Power Recovery. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  12. Al-Mamun, A., Rahman, S. and Baawain, M.S. 2018. Treatment of Landfill Leachate by Single Chamber Air-Cathode Microbial Fuel Cell. In: Proceedings of the 4th AP-ISMET meeting, India. Goa, 13-16 November, 2018.
  13. Al-Nuaimi, A., Al Rezaiqi, J. and Hago, A. 2018. Efficiency Factor of Cement Kiln Dust and Its Effect on Strength of Concrete. In: Proceedings of the 3rd International Conference on Applied Engineering, materials and mechanics (ICAEMM’18), Okinawa, Japan, 20-22 April, 2018.
  14. Al-Rawahi, U., Waris, M.B., Al-Jabri, K. and Al-Nuaimi, A. Comparison of Seismic and Wind Actions on Buildings in Oman. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  15. Al-Saadi, S.N. and Zhai, J. 2018. Impact of Air Distribution Systems on Thermal Performance of Supermarket. In: Proceedings of the 7th International Conference on Urban and Rural Energy and Environment (ICEEP 2018), Jilin Jilin, China, 11-14 July, 2018.
  16. Al-Saidy A. 2018. Strengthening of Reinforced Concrete Beams using Textile Reinforced Mortar. In: Proceedings of the 4th International Conference on Mechanics of Composites (MECHCOMP 2018), Madrid, Spain, 9-12 July, 2018.
  17. Al-Shamsi, K. and Hassan, H.F. 2018. Binder Contribution to a Lightly Trafficked Asphalt Pavement Made with Clear Binder. In: Proceedings of the 5th International Conference on Civil and Urban Engineering (ICCUE 2018), Barcelona, Spain, 11-13 March, 2018.
  18. Al-Sulaimi, I., Baawain, M.S. and Al-Mamun, A. 2018. Evaluation of Pressurized Sand Filtration Performance for Viable Helminths Ova Removal. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  19. Al-Wahaibi, B., Baawain, M.S. and Al-Mamun, A. 2018. Performance of Constructed Wetland (Reed Bed) Wastewater Treatment System. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  20. Baawain, M. 2018. CFD Modelling of DO in a Recycle Water Pond. In: Proceedings of the 8th International Conference on Fluid Mechanics (ICFM8), Tohoku University, Sendai, Japan, 25-28 September, 2018.
  21. Bouzguenda, I., Girona, S. and Alalouch, C. 2018. Designing for Co-creation: Lessons from Van‘t Hoff Square, Netherlands, for the Omani Context. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  22. Chitrakar, P., Sana, A., Baawain, M.S., Al-Mamun, A., Bruss G. and Kwarteng, A. 2018. Preliminary Assessment of Water Quality in the Coast of Muscat, Oman. In: Proceedings of the 13th International Conference on Coasts, Ports and Marine Structures (ICOPMAS), Tehran, Iran, 27-30 November, 2018.
  23. Gunawardhana, L.N. and Al-Rawas, G.A. 2018.  Parameterization of the Snyder Unit Hydrograph metHoD for arid regions. In: Proceedings of the 8th International Conference on Fluid Mechanics (ICFM8 2018), Sendai, Japan, 25-28 September, 2018.
  24. Hago, A., Al Jabri, A. and Baawain M. 2018. Compressive Strength of Interlocking Compressed Soil Blocks (ICSB) Produced Using Soil and Production Water from Oil Fields in Oman. In: Proceedings of the 2nd International Conference for Sustainable Design of the Built Environment (SDBE), London, England, 12-13 September, 2018.
  25. Malik, A.S., Al-Saadi, S., Al-Wahaibi, A., Al-Badi, A. and Al-Hinai, A. 2018. Energy Saving Potential in Residential Sector and Its Impact on Power Planning - A Case Study of the Main Interconnected System (MIS) of Oman. In: Proceedings of the 7th Brunei International Conference on Engineering and Technology (BICET 2018), Universiti Teknologi Brunei, Brunei Darussalam 12-14 November, 2018.
  26. Mohamed, A.A. and Mohamedzein, Y. 2018. Scour Effects on laterally Loaded Piles in Sand and Potential Remedial Measurements. In: Proceedings of the 8th Conference on Deep Foundation Technologies for Infrastructure Development in India, IIT, Gandhinagar, Gujarat, India, 15-17 November, 2018.
  27. Mohamed, A.A., Mohamedzein, Y., Al-Jabri. K. and Al-Aghbari, M. 2018. Experimental and Numerical Modeling of the Scour Effects on the Laterally Loaded Piles in Sand. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  28. Muqaibal, H., Al-Mamun, A. and Baawain, M.S. 2018. Simultaneous Electricity Production and Organics Removal from Domestic Sewage using Microbial Fuel Cell-Power Optimization Aspect. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  29. Pervez, T., Al-Kindi, M., Qamar, S.Z., Al-Jabri, K. and Waris, M.B. 2018. A Need to Establish Arab Accreditation Council for Engineering & Technology Education. In: Proceedings of 28th Arab Engineering Conference, Muscat, Oman, 11-13 December, 2018. 
  30. Rahman, S. and Al-Mamun, A. 2018. Prospects of Dissimilar Electron Donors to the Performance of Pseudomonas Aeruginosa Electroactive Bio-Films for Recovery of Electrical Energy. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  31. Ramaswamy, M., Al-Saadi, S. and Al Jahwari, F. 2018. Energy Benchmark for Different Building Typologies in Hot Climate. In: Proceedings of the 7th International Conference on Urban and Rural Energy and Environment (ICEEP 2018), Jilin Jilin, China, 11-14 July, 2018.
  32. Saleh, M.S. and Alalouch, C. 2018. Challenges & Opportunities of Sustainable Construction in Oman. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  33. Sohel, K.M. and Amal, A.A. 2018. Compressive Fatigue Strength of Plain Concrete. In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  34. Waris M.B. and Al-Sayed M. 2018. Seismic Analysis of Residential Buildings in Oman.  In: Proceedings of the 1st National Conference on Civil & Architectural Engineering (NCCAE 2018), Muscat, Sultanate of Oman, 26-28 March, 2018.
  35. Waris, M.B., Al-Harthy, A. and Al-Jabri, K. 2018. Incorporating the Human Dimension of Student Learning in Design Course through Group Projects. In: Proceedings of 28th Arab Engineering Conference, Muscat, Oman, 11-13 December, 2018.
  36. Waris, M.B., Najwani, H., Al-Jabri, K. and Al-Saidy, A. 2018. Use of Recycled Tyre Rubber in Non-Structural Concrete. In: Proceedings of the International Conference on Civil, Offshore & Environmental Engineering, (ICCOEE 2018), Kuala Lumpur, Malaysia, 13-15 August, 2018.
  37. Waris, M.B., Saeed, H., Al-Jabri, K. and Hussain, I. 2018. Comparison of Oman Seismic Code for Buildings with International Counterparts based on Seismic Hazard. In: Proceedings of the 10th Gulf Seismic Forum, Muscat, Oman, 19-22 March, 2018.
  1. Alalouch, C., Al-Hajri, S., Naser, A. and Al Hinai, A. 2017. The Role of the Spatial Configuration in Land Use Distribution in Muscat. Proceedings of International Conference for Sustainable Design of the Built Environment (SDBE), London, 19-22 December, 2017.
  2. Al-Jabri, K.S., Hassan, H.F. and Nasir, S. 2017. Recycling of Secondary Products to Create New Industries and the Sustainability of Natural Resources: Ferrochrome and Copper Slag Perspective. Proceedings of 5th Fujaira International Industrial Rocks and Mining Forum, UAE, 5 May, 2017.
  3. Al-Maktoumi, A., Zekri, S., El-Rawy, M., Abdalla, O., Al-Wardy, M., Al-Rawas, G. and Charabi, Y. 2017. Impacts of Climate Change on Coastal Aquifers in Northern Oman. Proceedings of the 12th Gulf Water Conference: Water in the GCC Towards Integrated Strategies, Manamah, Bahrain, 28-30 March,2017.
  4. Nasir, S. and Al-Jabri, K.S. 2017. In-Country Value “ICV” Strategy in the Mining Sector of Oman. Proceedings of the 5th Fujairah International Industrial Rocks and Mining Forum, Fujairah, UAE, 18-20 April, 2017.
  5. Al-Mamun, A. and Baawain, M.S. 2017. Prospects of Dissimilar Electron Donors on the Electrochemical Performance of a Double-Chambered Microbial Fuel Cell. Proceedings of the ISMET 6 meeting, Lisbon, Portugal, 3-6 October, 2017.
  6. Al-Mamun. A. 2017. Optimization of Bio-Cathode Based Microbial Fuel Cell Suitable for Practical Application of Wastewater Treatment and Electricity Generation. Proceedings of the ISMET 6 meeting,Lisbon, Portugal, 3-6 October, 2017.
  7. Al-Nuaimi A. 2017. Basic Wind Speed Map for Oman. Proceedings of the 4th International Conference on Advanced Steel Structures, Singapore, 9-10 November, 2017.
  8. Al-Rawahi, Z. and Waris M.B. 2017. Use of Recycled Tires in Non-Structural Concrete. Proceedings of Advances in Sustainable Construction Materials & Civil Engineering Systems (ASCMCES-17), Sharjah, UAE, 18-20 April, 2017.
  9. Al-Saadi, S., Ramaswamy, M., Al-Rashdi, H., Al-Mamari, M. and Al-Abri, M. 2017. Energy Management Strategies for a Governmental Building in Oman. Proceedings of the 4th International Conference on Power and Energy Systems Engineering, CPESE 2017, Berlin, Germany, 25-29 September,2017.
  10. Al-Saadi, S. and Al-Jabri, K.S. 2017. Energy-Efficient Envelope Design for Residential Buildings: A Case Study in Oman. Proceedings of the 2017 Smart City Symposium, Prague (SCSP2017), 25-26 May, 2017.
  11. Al-Saadi, S., Al-Hajri, J. and Sayari, M.A. 2017. Energy-Efficient Retrofitting Strategies for Residential Buildings in Hot Climate of Oman. Proceedings of the 9th  International Conference on Applied Energy, ICAE2017, Cardiff, UK, 21-24 August, 2017.
  12. Al-Saidy, A.H., El-Gamal S.E., Al-Jabri, K.S. and Waris, B. 2017. Behavior of Corroded RC Beams without Stirrups Repaired with CFRP Sheets. Proceedings of the Ninth International Structural Engineering and Construction Conference (ISEC-9), Resilient Structures and Sustainable Construction, Valencia, Spain, 24- 29 July, 2017.
  13. Al-Saidy, A.H., Hago, A.W. and El-Gamal S.E. 2017. Textile Reinforced Mortars for Strengthening of Historical Stone Buildings in Oman. Proceedings of the 3rd International Conference on Preservation, Maintenance and Rehabilitation of Historical Buildings and Structures (REHAB 2017), Braga, Portugal, 14-16 June, 2017.
  14. Chitrakar, P. Sana, A. and Baawain, M.S. 2017. Hydrodynamic Modeling of Sea of Oman. Proceedings of the 37th  IAHR World Congress, Kuala Lumpur, Malaysia, 13-18 August, 2017.
  15. El-Gamal S.E., Al-Nuaimi A., Al-Saidy A. and Al-Shanfari K. 2017. Flexural Behavior of Reinforced Concrete Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets Using Different Bonding Techniques. Proceedings of the 8th International Conference on Structural Engineering and Construction Management (ICSECM2017), Kandy, Srilanka, 7-9 December, 2017.
  16. El-Hussain, I., Omira, R., Al-Bulushi, K., Deif, A., Al-Habsi, Z., Al-Rawas, G., Mohamad, A., Al-Jabri, K.S. and Baptista, M.N. 2017. Tsunami Hazard Assessment Along Diba-Oman and Diba-Al-Emirates Coasts. Proceedings of the International Conference on Advances in Sustainable Construction Materials & Civil Engineering Systems (ASCMCES-17), University of Sharjah, UAE, 18-20 April, 2017.
  17. Jamil, F., Al-Muhtaseb, A., Al-Haj, L., Al-Hinai, M. and Baawain, M.S.  2017. Phoenix Dactylifera Kernel Oil Used as Potential Source for Synthesizing Jet Fuel and Green Diesel. Proceedings of the 2nd International Conference on Advances on Clean Energy Research, ICACER, Berlin, Germany, 7-9 April, 2017.
  18. Khudhayer, W.A., Shaaban, A.K. and Abdul Sukor, N.S. 2017. Trees as Environmental Modifier to Improve Street Canyon for Pedestrian Activities in Muscat. AIP Conference Proceedings 1892, 060001, 2017.
  19. Shaaban, A.K., Khudhayer, W.A. and Abdul Sukor, N.S. 2017. Total Shading System Approach at Sultan Qaboos University Eco-House project. AIP Conference Proceedings 1892, 160011, 2017.
  20. Sohel, K.M., Al-Jabri, K.S. and Liew, J.Y. 2017. Lightweight Steel-Concrete-Steel Sandwich Composite Plate Subjected to Impact Load: Experimental and Numerical Study. Proceedings of the 20th International Conference on Composite Structures (ICCS20), 4-7 September, 2017.
  21. Sohel, K.M., Al-Jabri, K.S, Liew, J.Y. and Zhang, M.H. 2017. Fatigue Performance of Ultra-Lightweight Cement Composite and High Strength Lightweight Concrete. Proceedings of the 1st International Conference on Cement & Concrete Technology: Concrete for the Modern Age, Developments in Materials and Processes, Military Technological College - Sultanate of Oman, 20-22 November, 2017.
  22. Waris M.B., Al-Jabri K.S. and Al-Saidy A. 2017. Application of Taguchi Method to Develop non-Structural Concrete with Recycled Rubber. Proceedings of the International Conference on Advances in Sustainable Construction Materials & Civil engineering Systems (ASCMCES-17), Sharjah, UAE, 18-20 April, 2017.
  23. Waris M.B., Saeed H., Al-Jabri K.S. and El-Hussain I. 2017. Comparison of Oman Seismic Code for Buildings with  International  Counterparts.  Proceedings  of  16th   World  Conference  on  Earthquake Engineering, 16WCEE, Santiago, Chile, 9-13 January, 2017.
  1. Abd El-Gelil, M. and Al-Shahri, M., 2016. Observation of Earth Free Oscillation Modes Using Cross Least Squares Wavelet Method. In: Proceedings of International Symposium on the Geodynamics and Earth Tide. Intelligent Earth System Sensing, Scientific Enquiry and Discovery, Trieste, Italy, 5-9 June 2016.

  2. Abd El-Gelil, M., Ghaderpour, E. and Pagiatakis, S. 2016. The Potential of the Cross Least Squares Wavelet Analysis for Estimating the Time-Frequency Transfer Function of Atmospheric Variations Effect of Superconducting Gravity Data. In: Proceedings of International Symposium on the Geodynamics and Earth Tide. Intelligent Earth System Sensing, Scientific Enquiry and Discovery, Trieste, Italy, 5-9 June, 2016.

  3. Al-Muhtaseb, A., Jamil, F., Baawain, M.S., Al-Hinai, M. and Abu-Jrai, A. 2016. Synthesis of Mesoporous Carbon Material from Waste “Date Seeds” and its Application for “Tertiary Butylation” of Phenol. In: Proceedings of the 3rd International Conference on Water, Waste and Energy Management, Rome, Italy, 18-20 July, 2016.

  4. Al-Shahri, M. 2016. Linear Feature Matching Using Wavelet Transformation. In: Proceedings of WG III/1 - Orientation and Surface Reconstruction, XXIII ISPRS Congress, Prague, Czech Republic, 12-19 July, 2016.

  5. Baawain, M.S. and Purnama, A. 2016. Modeling of Return Seawater Outfall from an Industrial Port in Oman. In: Proceedings of the 12th International Conference on Coasts, Ports & Marine Structures (ICOPMAS 2016), Tehran, Iran, 31 October 2- Novemebr, 2016.

  6. Chitrakar, P. Sana, A. and Baawain, M.S. 2016. The Hydrodynamic of Sea of Oman and Arabian Gulf. In: Proceedings of the 3rd International Conference on Coastal Zone Engineering & Management in the Middle East, Dubai, UAE, 20-24 November, 2016.

  7. Elsharief, A., Mohamedzein, Y. and Saad, S. 2016. Effects of Wetting on the Shear Strength of Plastic Silty Sands. In: Proceedings of 4th GeoChina International Conference, Jinan, China, 25-27 July, 2016.

  8. Gunawardhana, L.N., Al-Rawas, G.A. and Kazama, S. 2016. Assessment of Wadi-Flow Variations Attributed to Climate Change in Muscat, Oman. In: Proceedings of the 20th Congress of the Asia Pacific Division of the International Association for Hydro Environment Engineering and Research (IAHR APD 2016). Colombo, Srilanka, 28-31 August 2016.

  9. Hassan, H. and Al-Jabri, K. 2016. ABET Accreditation: An Engineering Experience from Sultan Qaboos University, Oman. In: Proceeding of 2nd International Conference on Higher Education Advances (HEAd’16), Valencia, Spain, 21-23 June, 2016.

  10. Al-Jabri, K.S., Hago, A., Hassan, H.F. and Mohamedzein, Y. 2016. Methods to Control Cracking in Mass Concrete for Bridge Abutments. In: Proceedings of ACI-KC 4th International Conference and Exhibition- Smart, Green and Durable Concrete Structures, Kuwait City, Kuwait, 8-10 November, 2016.

  11. Khoukhi, M. 2016. Change of the Thermal Conductivity of Polystyrene Insulation in Term of Temperature at the Mid Thickness of the Insulation Material: Impact on the Cooling Load. In: Proceedings of 18th International Conference on Mechanical Engineering, Montreal, Canada, 16-17 May 2016.

  12. Khoukhi, M. 2016. Effect of Operating Temperature and Moisture Content on the Thermal Conductivity of Building Insulation Material. In: Proceedings of 6th International Conference on Energy Research and Development, Kuwait City, Kuwait, 14-16 March, 2016.

  13. Meddah, M.S., Al-Jabri, K., Hago, A.W. and Al Hinai, A. 2016. Development of Pervious Concrete Using Local Materials for a Sustainable Drainage Solution. In: Proceedings of the Central Europe Towards Sustainable Building 2016, Innovations for sustainable future, Prague, Czech Republic, 22-24 June 2016.

  14. Meddah, M.S., Al-Shehhi, H and Al-Bulushi, S. 2016. Effect of Window Waste Glass as Substitute of Natural Sand on Concrete Performance. In: Proceedings of the 6th Amazon Pacific Green Materials Congress and Sustainable Construction Materials LAT-RILEM Conference, Sustainable Materials for a Living World, Cali-Colombia, 27-29 April, 2016.

  15. Meddah, M.S., Al-Shehhi, H and Al-Bulushi, S. 2016. Use of Waste Window Glass as Substitute of Natural Sand in Concrete Production. In: Proceedings of the International Conference on Recent Trends in Engineering and Material Sciences-(ICEMS-2016), Jaipur, India, 17-19 March, 2016.

  16. Mohamedzein, Y. and Al-Aghbari, M. 2016. The Performance of Strip Footing Resting on Geogrid-Reinforced Dune Sand. In: Proceedings of 4th GeoChina International Conference, Jinan, China, 25-27 July, 2016.

  17. Nur Eldayem, F. and Mohamedzein, Y. 2016. Finite Element Analysis of Laterally Loaded Piles in Clays. In: Proceedings of 4th GeoChina International Conference, Jinan, China, 25-27 July, 2016.

  18. Shaaban, A. 2016. Future Sustainability/Case Study SQU Eco-House. In: Proceedings of Austria Showcase, Green Building and Smart City Symposium, Muscat, Oman, 01 March, 2016.

1.      Abbasi, A., Alalouch, C. and Bramley, G. 2015. Open Space Quality in Deprived Urban Areas: User Perspective and Use Pattern. In: Proceedings of Urban Planning and Architectural Design for Sustainable Development 2015 Conference, Lecce, Italy. 14-16 October 2015. ISSN: 1877-0428.

2.      Alalouch, C., Saleh, M. S., Al-Saadi, S. 2015. Energy-efficient House in the GCC Region. In: Proceedings of Urban Planning and Architectural Design for Sustainable Development 2015 Conference, Italy. Lecce, 14-16 October 2015. ISSN: 1877-0428.

3.      Al-Aghbari, M. Y. and Mohamedzein, Y.  E-A. 2015. Improvement of bearing capacity of strip footings on dune sands using geogrids. In: Second International Conference on Trends in Multidisciplinary Business and Economic Research (TMBER), Bangkok, Thailand, 25-26 March 2015.

4.      Al-Bulushi, I., Edwards, J., Davey, J., Armstrong, K., Al-Maniri, A. and Al-Shamsi, K. 2015. Socio-Cultural Influences on Vehicle Defects in the Omani Heavy Vehicle Industry. In: Australasian Road Safety Conference (ARSC2015), Gold Coast, Australia, 14-16 October 2015.

5.      Al-Jabri, K. Benkari, N. 2015. The Role of Academic Institution in the Documentation and sustainable development of Built Heritage. In: Proceedings of the National Built Heritage Forum. Kingdom Of Saudi Arabia, Qassim Province. 29 November-03 December 2015.

6.      Al-Jabri, K. S. 2015. Potential Use of Spent Catalyst as A construction Materials, In: UKIERI Concrete Congress, 2-5 November 2015, Jalandhar, India.

7.      Al-Mamun, M.D. and Baawain, M.S. 2015. Application of Electrochemically Active Marine Biofilms in An Osmotic Microbial Fuel Cell for Electrical Energy and Clean Water Recovery. In: Fifth International Conference on Estuaries and Coasts (ICEC2015), Sultanate of Oman, Muscat, 2-4 November 2015.

8.      Al-Mamun, M.D., Al-Saidi A. and Baawain M.S. 2015. Fixing aerobic marine biofilm cathode in a compact osmotic microbial fuel cell for freshwater recovery and power generation. In: The 5th International meeting on microbial electrochemistry and technologies, Tempe, Arizona, USA, 1-4 October 2015.

9.      Al-Saadi S.N.J. 2015. Phase change materials for autonomous energy storage in buildings. In:  Proceedings of Building Simulation 2015: 14th International Conference of the International Building Performance Simulation Association (IBPSA). International Building Performance Simulation Association (IBPSA).

10.  Al Salhi, A., Gunawardhana, L.N. and Al-Rawas, G.A. 2015. Assessment of future variability in extreme precipitation in Muscat, Oman. In: Proceedings of the 5th International Conference on Estuaries and Coast (ICEC2015). Sultanate of Oman, Muscat, 2-4 November 2015.

11.  AlSheraida, O., El-Gamal, S.E. and Al-Saidy, A. 2015. Wedge Anchorage System for Prestressed CFRP Reinforcement - A Literature Review. In: Proceedings of the International Conference on Innovations in Civil and Structural Engineering (ICICSE 2015), Istanbul, June 3-4, 2015.

12.  Al Shibani, S., Gunawardhana, L.N. and Al-Rawas, G.A. 2015. An Assessment of Trends in Extreme Temperature in Five Regions in Oman. In: Proceedings of the 5th International Conference on Estuaries and Coast (ICEC2015). Sultanate of Oman, Muscat, 2-4 November 2015.

13.  Baawain, M.S., Al-Balushi, H. and Al Zakwani, A. 2015. Removal of Organic Constituents from Treated Wastewater using Nanotechnology and Advanced Oxidation Processes. In: Proceedings of the International Conference on Biotechnology, Nanotechnology and Environmental Engineering, Bangkok, Thailand, April 2015.

14.  Baawain M.S., Al-Mamun M.D., Sana A. and Al-Wahaibi, A. 2015. Performance of Membrane Bioreactor versus Activated Sludge at a Domestic Wastewater Treatment Plant in Oman. In: Proceedings of the Annual CSCE Conference, Regina, Canada, May 2015.

15.  Benkari, N. 2015. A Document of Ibadi Jurisprudence Related to the Architecture of Mosques. In: Proceedings of the 1st International Islamic Heritage conference (1st InHeC 2015). Malaysia, Melaka, 11-12 November 2015.

16.  Chitrakar, P. Baawain, M.S. and Sana, A. 2015. A Review of Marine Pollution Studies in Sea of Oman. In: Proceedings of the 5th International Conference on Estuaries and Coasts (ICEC2015) November 2-4, 2015, Muscat, Oman.

17.  El-Gamal, S.E., Al-Jabri K.S., Al-Mahrouqi S.S. and Al-Mahri A.S. 2015. Performance of Concrete Cylinders Confined with FRP Sheets after Exposure to Elevated Temperatures. In: Proceedings of the First International Conference on Structural Safety under Fire & Plast (CONFAB 2015), Glasgow, Scotland, UK, 2-4 September 2015, pp 482-489.

18.  El-Gamal, S., Al-Jabri, K., Al-Mahri, A. and Al-Mahrouqi, S. 2015. Effects of Elevated Temperatures on the Compressive Strength Capacity of Concrete Cylinders Confined with FRP Sheets: An Experimental Investigation. In: Proceedings of the First International Conference on Structural Safety under Fire and Blast (CONFAB 2015), Glasgow, UK, 2-4 September 2015.

19.  El-Maaddawy, T. and Al-Saidy, A. 2015. Residual Strength of Glass Fiber-Reinforced Polymer Bars in Seawater-Contaminated Concrete. In: Proceedings of the Fifth International Conference on Construction Materials (ConMat' 15): Performance, Innovations and Structural Implications, Vancouver, CANADA, 19-21, August 2015.

20.  Khoukhi, M. 2015. Variation of Thermal Conductivity of Polystyrene Insulation Material under Different Operating Temperatures and Moisture Contents. In: International Conference on Advances in Mechanical and Automation Engineering, Italy. Rome, 18-19 April 2015.

21.  Meddah, M.S., Nukushina, T., Seiki, S and Sato, R. 2015. Properties of Binary Flay Ash Concrete Internally Cured with Waste Ceramic Tile Aggregate. In: UKIERI Concrete Congress, Concrete Research Driving Profit and Sustainability, Jalandhar, India. 2-5 November 2015

22.  Purnama, A., Baawain, M.S., and Shao, D. 2015. CORMIX Simulations of Dredged Sediment Discharges in Coastal Waters. In: Proceedings of the 5th International Conference on Estuaries and Coasts (ICEC2015) , Muscat, Oman, November 2-4, 2015

23.  Soltanpour, M. Sana, A. and Baawain, M.S. 2015. A Review of Sedimentation and Preferred Solutions at Al-Ashkarah Fishery Port, Sultanate of Oman. In: Proceedings of the 5th International Conference on Estuaries and Coasts (ICEC2015), Muscat, Oman, November 2-4, 2015.

24.  Waris, M.B. and Ishihara, T. 2015. Influence of Floater Response on Wind Turbine tower moments in Floating Wind Turbine System. In: Proceeding of the 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMDYN2015), Crete Island, Greece, 25-27 May 2015


1.      Alalouch, C., Aspinall, P.A. and Smith, H. 2014. Design Criteria for Privacy-Sensitive Healthcare Building. In: Proceedings of 2014 Second International Conference on Civil and Architectural Engineering, IACSIT Press, Edt. Du Li, Bali, Indonesia, 27-28 September 2014. 

2.      Al-Jabri, K.S. 2014. Recycling of Industrial by-Products in the Construction Field in Oman - An overview. In: Proceedings of the International Conference on Environmentally Friendly Civil Engineering Construction and Materials, Manado, Indonesia, 13-14 November 2014.

3.      Al-Jabri, K.S., Prashob, P., Waris, M.B. and Pervez, T. 2014. 3D Finite Element Modelling of Beam-Column Flexible End - Plate Composite Connections at Elevated Temperatures. In: Proceedings of 8th International Conference on Structures in Fire, Shanghai, China, 11-13 June 2014.

4.      Al-Khatri, H. and Gadi, M.B. 2014. Using a New Programme to Predict Thermal Comfort as a Base to Design Energy Efficient Buildings. In: Proceedings of the STDC2014 – Sustainable Technology and Development Symposium. Al Musanna, 21 April 2014.

5.      Al-Mamun, A., Al-Saidi, A. and Al Mandhari, S. 2014. Waste to Watts: An Integrated Approach to Generate Electricity form Wastewater and Desalination of Seawater Using Bacteria. In: Proceedings of 5th Engineering Students Renewable Energy Competition 2014, UAE University, Al Ain, UAE, May 3, 2014.

6.      Alnuaimi, A.S., Al Balushi, I.A. and Fathoni, U. 2014. Value Engineering in Construction Industry in Oman.  In: Proceedings of the 2nd International Conference on Advances in Civil, Structural and Environmental Engineering - ACSEE’14, Zurich, Switzerland, 25-26 October 2014.

7.      Alnuaimi, A.S., Al Anbari, S. and Khalina, A. 2014. Assessment of Safety and Health Risks at Construction Projects of Oman. In: Proceedings of the 3rd International Conference and Exhibition on Occupational Health and Safety Omics Group Conferences, 2(3), Valencia, Spain, 24-25 June, 2014.

8.      Baawain, M.S. and Al-Belushi, T. 2014. Effects of Septic Tank Leakage on Groundwater Quality: a Case Study from Oman. In: Proceedings of the 19th IAHR-APD Congress. Hanoi, Vietnam, 21-24 September 2014.

9.      Benkari, N. and Al-Hashim, A. 2014. Omani Traditional Houses and Settlements: New Options for Developing a Sustainable Tourism. In: Proceedings of VII International Tourism Congress, SQU, Department of Tourism, Muscat, Oman, 2-4 December 2014.

10.  Benkari, N. 2014. The Characteristics of the Ibadi Religious Architecture, Study of the Mosques of Mzab, Djerba, Nafusa and Oman. In: Proceedings of International Seminars on Vernacular Settlements ISVS-7: Re-Assessment of Vernacular Architecture. Istanbul.

11.  El-Gamal, S., Alnuaimi, A., Al-Saidy, A. and Al-Lawati, A. 2014. Flexural Strengthening of RC Beams Using Near Surface Mounted Fibre Reinforced Polymers. In: Proceedings of Brunei International Conference on Engineering and Technology, Institut Teknologi Brunei, Brunei Darussalam, 1-3 November 2014.

12.  Çakti, E., Hancilar, U., Sesetyan, K., Kamer, Y., Safak, E., El-Hussain, I., Deif, A., Al-Rawas, G. and Al-Jabri, K. 2014. Development of Shake Maps for the Sultanate of Oman. In: Proceedings of the Second European Conference on Earthquake Engineering and Seismology, Istanbul, 25-29 August 2014.

13.  Al-Rawas, G., Hewawasam, L., Silva, A., Santo, F.E. and Pires, V. 2014. Rainfall Temporal Variability Analysis and the Use of Standardized Precipitation Index to Identify Dry and Wet Periods in Oman. In: Proceedings of the European Geosciences Union General Assembly 2014, Vienna, April 27-May 2, 2014.

14.  Gunawardhana, L. and Al-Rawas, G. 2014. Trends in Extreme Temperature and Precipitation in Muscat, Oman. In: Proceedings of the ICWRS2014- Evolving Water Resources Systems: Understanding, Predicting and Managing Water-Society Interactions, Bologna, Italy, June 2014.

15.  El-Hussain, I., Baptista, M., Omira, R., Al-Rawas, G., Deif, A., Al-Habsi, Z. and Al-Jabri, K. 2014. Tsunami Hazard Assessment along the Coast of Oman from Near- and Far-Field Tectonic Sources. In: Proceedings of the European Geosciences Union General Assembly 2014, Vienna, April 27-May 2, 2014.

16.  Khoukhi, M. 2014. Investigation of the Impact of Operating Temperature on Thermal Conductivity of Polystyrene Building Insulation Material and its Effect on the Envelope-Induced Cooling Load. In: Proceedings of the First International Conference on Energy and Indoor Environment for Hot Climates, Qatar, Doha, 24-26 February 2014.

17.  Khoukhi, M. 2014. Variation of Thermal Conductivity of Polystyrene Insulation Material under Different Operating Temperatures. In: Proceedings of the 7thInternational Conference on Thermal Engineering: Theory and Application, Morocco, Marrakesh, 6-8 May 2014.

18.  Abd El-Gelil, M. 2014. Earth Oscillation after Major Strong Earthquakes in the Last Ten Years (2004-2013). In: Proceedings of the European Geosciences Union General Assembly 2014, Vienna, Austria, 27 April - 02 May 2014

19.  Meddah, M.S., Nukushina, T., Seiki, S. and Sato, R. 2014. Lowering the Embodied CO2 by Using Flay Ash Concrete Internally Cured With Recycled Ceramic Tile Aggregates. In: Proceedings of the International Conference on Construction Materials and Structures ICCMATS, Johannesburg, South Africa, 24-26 November 2014.

20.  Deal, M.S. and Abd El-Gelil, M. 2014. Investigation into Various Factors Influencing the Achievable Accuracy of Kinematic GNSS Height Observations for Road Surveys. In: Proceedings of AfricaGEO 2014 Conference, Cape Town, South Africa, 1-3 July, 2014.

21.  Mohamedzein, Y., Al-Ghaithi, A. and Al-Aghbari, M. 2014. The Properties of Dune Sand-Bentonite Mixtures for Use as Landfill Liners. In: Proceeding of the Twenty-Ninth International Conference on Solid Waste Technology and Management, Philadelphia, USA, 30 March-1 April 2014.

22.  Sana, A. 2014. Modeling of Boundary Layers under Wave-Current Combined Motion. In:  Proceedings of the 11thInternational Conference on Coasts, Ports and Marine Structures (ICOPMAS 2014), Tehran, Iran, 24-26 November 2014.

23.  Sana, A. and Baawain, M. 2014. Groundwater Modeling of a Coastal Plain Aquifer in Southern Oman. In: Proceedings of 19th Congress of The Asia and Pacific Division of International Association for Hydro-Environment Engineering and Research (IAHR-APD 2014), Hanoi, Vietnam, 21-24 September 2014.

24.  Sana, A. and Tanaka, H. 2014. Modification of a Turbulence Model to Analyze Oscillatory Boundary Layers on a Rough Bottom. In: Proceedings of the 34th International Conference on Coastal Engineering, Seoul, South Korea, 15-20 June 2014.

25.  Sana, A. 2014. Hydrodynamic and Thermal Dispersion Modeling of the Effluent in a Coastal Channel. In: Proceedings of the International Conference on Desalination, Environment and marine Outfall Systems (ICDEMOS 2014), Muscat, Oman, 13-16 April 2014.

26.  Shaaban, A.K. and Al-Khatri, H. 2014. Sustainable Urban Space-Environmental Considerations for Pedestrian Comfort in Muscat Region. In: Proceedings of the International Conference: Challenges of Urbanization in the Arab Gulf Countries, German University of Technology, Muscat, 23-25 March 2014.

27.  Waris, M.B., Ali, N. and Al-Jabri, K. 2014. Use of Recycled Tire in Concrete for Partial Aggregate Replacement. In: Proceedings of the International Conference on Civil Engineering ICCEN14, Mauritius, 29-30 November 2014.


1.                  Al-Jabri, K., Al-Kamyani, Z. Taha, R., Baawain, M., Al-Shamsi, K. and Al-Saidy, A.H. 2013. Effect of Spent Catalyst as a Fine Aggregate on the Properties of Concrete. In: Proceedings of the 2013 Architectural Engineering Institute (AEI) Conference, Pennsylvania, USA, April 3-5, 2013.

2.                  Al-Hashim, A., Spiric, L. and Chalfoun, N. 2013. Net Zero Station Design for The Cooper Centre for the Environmental Learning in Tucson, Arizona. In: Proceedings of the Improving Performance of Existing Buildings. Pomona, California, USA. 2013.

3.                  Al-Khatri, H. and Gadi, M.B. 2013. Development of a New Computer Model for Predicting Thermal Comfort in Different Climates using the Visual Basic Programming Language. In: Proceedings of 3rd Conference: People and Buildings, United Kingdom. London, 20 September 2013.

4.                  Alnuaimi, A.S. and Al-Mohsin, M.A. 2013. Causes of Delay in Completion of Construction Projects in Oman. In: Proceedings of the International Conference on Innovations in Engineering and Technology (ICIET'2013), Bangkok, Thailand, 25-26 December 2013.

5.                  Alnuaimi, A.S. and Patel, I.Y. 2013. Comparison between ACI318:08 and BS8110:97 codes on Requirements for Deflection and Crack width, ACI318:2008 and BS8110:1997. In: Proceedings of the 2nd International Conference on Engineering and Applied Science, ICEAS 2013, Tokyo, Japan , 15-17 March 2013.

6.                  Al-Rawas, G. 2013. Urbanization Impact on Rainfall-Runoff Modeling: An Integration of Remote Sensing and GIS Approach. In: Proceedings of the 6th International Conference on Water Resources and Environment Research, Koblenz, Germany. 3-7 June 2013.

7.                  Baawain, M.S., Al-Mujaini, F. 2013. Municipal Solid Wastes in Muscat: Classification, Potential Problems, and Reuse Options. In: Proceedings of the Solid & Hazardous Wastes Conference in the Gulf Region, Kuwait, April 2013.

8.                  Baawain, M.S., Sana, A. 2013. Groundwater Quality in Terms of Nitrate and Salinity along a Coastal Strip Subjected to Extensive Pumping Activities and to Artificial Recharge. In: 35th IAHR World Congress, Chingdu, China, September 2013.

9.                  Benkari, N. 2013. Does Sustainability Matter? The sustainability Paradigm in Architectural Education in UAE. In: ELSEVIER Procedia-Social and Behavioral Sciences, 2013.

10.              El-Hussain, I., Deif, A., Al-Jabri, K., Al-Rawas, G., El-Zain, Y., Kwarteng, A., Al-Wadri, M., Sundararanjan, N., 2013. Shear Wave Velocity by MASW in Earthquake Hazard Assessment Studies in and Around Muscat, Oman. In: Proceedings of the National Conference on Earth Sciences in India: Challenges and Emerging Trends (ESICET-2013), 7-9 November 2013.

11.              Khoukhi, M. and Tahat, M. 2013. Effect of Operating Temperatures on Thermal Conductivity of Polystyrene Insulation Material: Impact on Envelope-Induced Cooling Load. In: Proceedings of the International Conference on Advances in Mechanical and Manufacturing Engineering, Kuala Lumpur, Malaysia 26-28 November 2013.

12.              Khoukhi, M. 2013. A Study of desiccant-based cooling and dehumidification system in hot-humid climate. In: Proceedings of the 2nd International Conference on Fluid Dynamics and Thermodynamics Technologies (FDTT 2013), Istanbul, Turkey, 15-16 March 2013.

13.              Sana, A. 2013. Enhancing Water Resources and Coastal Engineering Curricula Using Visual Basic Programs in MS-Excel. In: Proceedings of the International Civil and Infrastructure Engineering Conference (InCIEC-2013), Kuching, Malaysia, 2013.

14.              Sana, A., Baawain, M. and Al-Sabti, A. 2013. Feasibility Study of Using Treated Wastewater to Mitigate Seawater Intrusion along Northern Coast of Oman. In: 5th International Conference on Water Resources and Arid Environments, Riyadh, K.S.A. 2013.

15.              Taha, R., Al Nasseri, H., Al-Jabri, K., Alnuaimi, A. and Al-Harthi, A. 2013.Production of Nano Sized Particles from Cement Kiln Dust. In: Proceedings of the Innovation in Concrete Construction, Jalandhar, Punjab, India, 5-8 March 2013.


1.                  Al-Harthy, A.2012. Sustainable Outcome Based Assessment of Engineering Programs at Sultan Qaboos University. In: Proceeding of the 7th International Technical Education and Development Conference, Valencia, Spain 4-7 March 2012.

2.                  Al-Jabri, K., Al-Kamyani, Z. Taha, R., Baawain, M. and, Al-Shamsi, K. 2012. Use of Spent Catalyst as an Additive Cementituous Material in Concrete and Masonry blocks.

3.                  Al-Jabri, K., Al-Kamyani, Z. Taha, R., Baawain, M., Al-Shamsi, K. and Al-Saidy, A.H. 2012. Performance of Concrete Made with Spent Catalyst as Cement Replacement. In Proceedings of fib Symposium STOCKHOLM 2012: Concrete Structures for Sustainable Community, Sweden. 11-14 June 2012

4.                  Al-Rawas, G., Valeo, C., Kohl, B., and Kirnbauer R. 2012. Rainstorm Characteristics in Oman and Austria. In: Proceedings of 12thCongress INTERPRAEVENT, Grenoble, France, 23-26 April, 2012.

5.                  Al-Saidy, A.H., Al-Jabri, K.S, Al-Harthi, A.S. and Al-Zadjali, S.M. 2012.Textile Reinforced Mortar for Strengthening Reinforced Concrete Beams. In: Proceedings of the ECCM15 15th European Conference on Composite Materials, Venice, Italy, 24-28 June 2012.

6.                  Baawain M.S., and Sana A. 2012. Feasibility of Treated Wastewater Application for Aquifer Recharge to Defy Saline Water Intrusion. In: Proceedings of the 5th International Groundwater Symposium. Kuwait, Kuwait, 19-21 November 2012.

7.                  Baawain M.S., Sana A., Al-Yahyai R., and Al-Sabti A. 2012. Sustainable and Beneficial Options for Reusing Treated Wastewater in Muscat, Oman. In: Proceedings of the 12th International Environmental Specialty Conference. Edmonton, Alberta, Canada, 6-9 June 2012.

8.                  Baawain M.S., Treiky H., and Al-Sabti A. 2012. Reusing Treated Wastewater in Muscat: Social Survey. In: Proceedings of the Tenth Gulf Water Conference, Water in the GCC States, The Water-Energy-Food Nexus. Doha, Qatar, 22-24 April 2012.

9.                  Khoukhi M. and Abbas Jassim S. 2012. Feasibility of Using Desiccant Cooling System in Hot-Humid Region. In: Proceedings of the Asia-Pacific Power and Energy Engineering Conference (APPEEC 2012), China. Shanghai, 27-29 March 2012.

10.              Mandour, M. 2012. Cairo the Combat Land. In: Proceedings of the Conference Cities to be Tamed, Milan-Italy.

11.              Al-Jabri, K.S., Al-Saidy, A.H., Ambu Ali, Y.Y., and Al-Kamyani, Z. 2012. Effects of Elevated Temperatures on Properties of Concrete Made with Local Aggregates. In: Proceedings of ACI-KC 3rd International Conference and Exhibition. Kuwait. 8-10 May 2012.

12.              Sana, A. and Baawain, M. 2012. Verification of a Turbulence Model for Rough Oscillatory Boundary Layers. In: Proceedings of 10th International Congress on Advances in Civil Engineering (ACE 2012), Ankara, Turkey, 17-19 October 2012.

13.              Sana, A. and Tanaka, H. 2012. Using a Two-Equation Turbulence Model to Study Irregular Wave Bottom Boundary Layers. In: Proceedings of the 10th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2012), Tehran, Iran, 19-21 November 2012.

14.              Taha, R.A., Al-Nasseri, H.A., Al-Jabri, K.S., Al-Nuaimi, A.S., and Al-Harthy, A.S. 2012. Use of Milled Cement Kiln Dust in Cement Mortars. In: Proceedings of the Third International Conference on Construction in Developing Countries (ICCIDC–III): Advancing Civil, Architectural and Construction Engineering & Management. Thailand. 4-6 July 2012.


1.      Al-Dhamri, H., Melghit, K., Taha, R.A. and Ram, G. 2011. Utilization of By-Product from Petroleum Refinery in Portland Clinker and Cement Manufacturing. In: Proceedings of the 13th International Congress on the Chemistry of Cement, Madrid, Spain, July 2011.        

2.      Al-Jabri, K. S., Al-Azri, M., Al-Ismaili, A., and Al-Jahwari, F. 2011. Finite Element Analysis of Beam-to-Column Joints at Elevated Temperatures. In: Proceedings of the 6th International Symposium on Steel Structures, 3-5 November 2011, Seoul, South Korea.                        

3.      Al-Jabri, K. S., Al-Saidy, A. H., Taha, R., and Al-Kemyani, A. J. 2011. Effect of Using Wastewater on the Properties of High Strength Concrete.In: The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-12), Hong Kong, China, 24-26 January 2011.      

4.      Al-Jabri, K., Ishtieh, A., Al-Kamyani, Z., Taha, R., Baawain, M.S., Al-Shamsi, K.2011. Use of FCC Spent Catalyst as Partial Replacement of Cement or/and Fine Aggregates in Cement Mortars. In: Proceedings of the International Symposium on Cement & Concrete Materials, Ningbo, China, November 2011.

5.      Al-Rawas, G. 2011. Flash Floods in Oman. In: Proceedings of the Tropical Cyclones: Preparedness and Risk Reduction, UNESCO and Oman Water Society, Muscat, Sultanate of Oman, June, 2011.

6.      Al-Siyabi A., Jesil A., Sarkar J.P., Baawain M.S., Feroz S. 2011.Solar Photo Catalysis to Remove Organics in a Flat Plate Reactor. In: Proceedings of the International Conference on Harnessing Technology: Challenges & Opportunities in GCC States. Renewable Energy Resources, Muscat, Oman, February 2011.

7.      Baawain, M.S. 2011. Groundwater Recharge with Treated Wastewater Effluents in Oman: Solution for Saline Water Intrusion or Contamination of Groundwater Aquifers. In: Proceedings of the Water Convention: Singapore International Water Week Conference, Singapore, July 2011.       

8.      Baawain, M.S. 2011. Wastewater Reuse Applications in Oman: Current Practice and Future Trends. In: Proceedings of the Wastewater Reuse Asia, Bangkok, Thailand, August 2011.          

9.      Baawain, M.S., Al-Jabri, M. 2011. Characterization of Wastewater Sludge in Oman. In: Proceedings of the 4th Kuwait Waste Management Conference & Exhibition, Kuwait, October 2011.

10.  Elkamash, M.K. and Baawain, M.S. 2011. Hydrodynamic Simulations to Investigate Protection Alternatives against Jellyfish Ingress. In: Proceedings of the 20th Canadian Hydro-technical Conference, Ottawa, Canada, June 2011.

11.  Garba, S. B. 2011. Incorporating Time and Change in EBS Research. In: Proceedings of the Death and Life of Social Factors Conference, College of Environmental Design, University of California, Berkeley, 29 April - 1 May 2011.

12.  Khoukhi, M. and Al-Maqbali, A. 2011. Stack Pressure and Airflow Movement in High and Medium Rise Buildings. In: Proceedings of the Medgreen 2011-LB Conference, April 14-16, 2011, Beirut, Lebanon.       

13.  Khoukhi, M., Al-Jabri, K. and Mandour, A. 2011. Airflow Simulation and Smoke Movement in High Rise Buildings.In: Proceedings of the International Workshop on Fire Safety Engineering and Management, March 7 to 9, Muscat, Oman.

14.  Mandour, M. 2011. Decoding History: Past, Present and Future. In: Proceedings of the Case of Newly Urbanized Gulf Cities, Tokyo, Japan, September 2011.         

15.  Mandour, M. 2011. Perspective versus Perspectives. In: Proceedings of the GUtech , Muscat Conference, Muscat, 2011                                                                                      

16.  Mandour, M. 2011. The Gulf Cities in Transition. In: GUtech, Muscat Symposium, Muscat 2011.    

17.  Sana, A. 2011. A Numerical Scheme to Study Oscillatory Boundary Layers. In: Proceedings of the Second International Conference on Numerical Analysis and Optimization, Muscat, Oman, 3-6 January, 201.

18.  Sana, A. and Baawain, M. 2011. Assessment of Seawater Quality along Northern Coast of Oman. In: Proceedings of the Sixth International Conference on Asian and Pacific Coasts (APAC 2011), Hong Kong, China, 14-16 December 2011.

19.  Shaaban, A.K. 2011. Thinking Sustainable, Overall Urban Concepts in Oman. In: Proceedings of the Towards Sustainable Urbanization Patterns in Oman, GUtech German University of Technology, 4-5 June 2011.


Enter Title