Mechanical and Industrial Engineering
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  1. Abdo, J., Hassan, E.H. and Kwak, J.K. 2018. Drillstring Fatigue Failure- Identification, Modelling, and Prevention. In: Proceeding of the 12th International Conference on Fatigue Damage of Structural Materials, Hyannis, MA, USA, 16-21 September 2018.
  2. Abdul-Wahab, S.A. 2018. NOx Released from a Gas Turbine-Based Power Plant Operating on Fuel Oil: Open and Combined Cycle Mode. In: Proceedings of IIER 553rd International Conference on Natural Science and Environment (ICNSE), Milan, Italy, 26-27 December 2018.
  3. Ahmed N.J.S., Kamangar, S., Al-Rashed, A.A., Govindaraju, K. and Khan, T.M.Y. 2018. Natural Convection in Annular Cone: Influence of Radius Ratio, In: Proceedings of American Institute of Physics Conference, Bikaner, India, 8 May 2018.
  4. Ahmed, N.J.S., Ahamed, K.S.N., Al-Rashed, A.A.A., Kamangar, S., Abdulgaphur A. 2018. Thermal Non-Equilibrium in Porous Medium Adjacent to Vertical Plate: ANN approach. In: Proceedings of American Institute of Physics Conference, Bikaner, India, 8 May 8 2018.
  5. Al-Kindi, M. and Al Kharusi, S. 2018. Towards Assessment of Innovation in Smes with Decision Analysis Concepts. In: Proceedings of the International Conference on Industrial Engineering and Operations Management, Bandung, Indonesia, March 2018.
  6. Al-Shabibi, A.M., Al Moharbi, M. and Al Owaisi, S. 2018. Determination of Burst Pressure for Defected Pipes. In: Proceedings of the 6th International Conference on Integrity-Reliability-Failure, Lisbon, Portugal, 22-26 July 2018.
  7. Alam, K., Khan, M. and Silberschmidt, V.V. 2018. Finite Element Modeling and Analysis of Ultrasonically-Assisted Drilling of Bone. In: Proceedings of the 10th International Conference on Computer Modeling and Simulation. Sydney, Australia, 8-10 January 2018.
  8. Al-Azri, N. 2018. Constrained Heat Integration using Pinch Analysis and Mathematical Programming. In: Proceedings of the International Conference on Operations Research and its Applications, Muscat, Sultanate of Oman, 2-3 April 2018.
  9. Al-Hinai, N., Al-Yazidy, N., Al-Hooti, A. and Al-Shereiqi, E. 2018. A Generalized Mathematical Model for Nurse Scheduling at Emergency Department. In: Proceedings of the International Conference on Industrial Engineering and Operations Management, Bandung, Indonesia, 6-8 March 2018.
  10. Al-Janabi, A. and Shaaban, A. 2018. Effect of Shell Configuration on Surface Temperature Profile. In: Proceedings of the 1st National Conference on Civil and Architectural Engineering, Sultanate of Oman, March 26-28, 2018.
  11. Al-Janabi, A., Al-Hajri, G. and Al-Maashani, T., 2018. Potentiality of Converting Low-Grade Industrial Waste Heat into Power in Oman. In: Proceedings of the 11th International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT2018), Cracow, Poland, 21-24 May 2018.
  12. AlSaleh, A. and Ouakad, H.M. 2018. Analysis of the Lateral Vibrations of an Unbalanced Jeffcott Rotor. In: Proceedings of the 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV), Lisbon, Portugal, 10-12 September 2018.
  13. Alzebdeh, K., Nassar, M. and Al- Hinai, N. 2018. Assessment of Induced Delamination during End-milling of Natural Fiber Reinforced Composites: A Statistical Analysis. In: Proceedings of ASME 2018 International Mechanical Engineering Congress and Exposition, Pittsburgh, USA, November 2018.
  14. Arunachalam, R., Al-Fori, I., Muraliraja, R., Al-Maharbi M., and Piya, S. 2018. Development of a Hybrid Aluminum Metal Matrix Composite Through Squeeze Casting Process. In: Proceedings of the 2nd International Conference on Materials Design and Applications (MDA 2018), Porto, Portugal, 5-6 July 2018.
  15. El Dirdiry O. and Zaier R.  2018. Modeling Biomechanical Legs with Toe-Joint Using Simscape. In: Proceedings of the 11th International Symposium on Mechatronics and its Applications, ISMA, Sharjah, United Arab Emirates, 4-6 March 2018.
  16. Ghodsi, M., Ziaiefar, H., Alam, K., Mohammadzahcri, M., Al-Yahmedi, A., Ghodsi, M.H. and Omar, F.K. 2018. Electromechanical Modelling and Experimental Verification of Cantilevered Permendur Energy Harvester, In: Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Auckland, New Zealand, 9-12 July 2018.
  17. Gismelseed, S., Al-Yahmedi, A., Shafiq, M. and Zaier, R. 2018. Effect of Various Torso Orientations on Consumed Energy and Kinetic Pattern of a Biped Mode.  In: Proceedings of the 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2018), Sarawak, Malaysia, 3- 6 December 2018.
  18. Hasan, M.H., Ouakad, H.M., Jaber, N.R., Al Hafiz, M.A., Alsaleem, F. and Younis, M.I. 2018. An Experimental and Theoretical Investigation of Double Resonance Activation in Electrostatic MEMS Resonators. In: Proceedings of the ASME 2018 ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Quebec City, Canada, August 26–29 2018.
  19. Husain, A. and Zunaid, M. 2018. Micro-Scale Cooling: A Short Review.  In: Proceedings of International Conference on Advanced Production and Industrial Engineering. New Delhi, India, 5 October 2018.
  20. Husain, A., Khan, F.A., Al-Rawahi, N.Z. and Samad, A. 2018. Blood Flow and Mixing Analysis in Split and Recombine Micromixer with Offset Fluid Inlets.  In: Proceedings of the ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting. Quebec, Canada, 15-20 July 2018.
  21. Husain, A., Singhal, R. and Ansari, M.Z. 2018. Characteristic Dimensions of Uniformly Converging, Diverging and Converging-Diverging Microchannels. In: Proceedings of International Conference on Advanced Production and Industrial Engineering. New Delhi, India, 5 October 2018.
  22. Husain, A., Zunaid, M. and Gautam, R. 2018. Microjet Impingement with Flow Extraction. In: Proceedings of the 1st International Conference on New Frontiers in Engineering, Science & Technology. New Delhi, India, 8-12 July 2018.
  23. Osman, A. and Al-Hinai, N. 2018. Project Management versus Operations Management: A Comparative Study. In: Proceedings of the International Conference on Industrial Engineering and Operations Management, Bandung, Indonesia, 6-8 March 2018.
  24. Pervez T., Al-Abri O.S. and Qamar S.Z. 2018. Modeling of Mandrel Stick and Slip in Tube Expansion. In: Proceedings of 2nd International Conference on Petrochemical Engineering, Kuala Lumpur, Malaysia, 23-25 July 2018.
  25. Pervez T., Al-Kindi M., Qamar S.Z., Al-Jabri K.S. and Waris S.M.B. 2018. A Need to Establish Arab Accreditation Council for Engineering & Technology Education. In: Proceedings of 28th Arab Engineering Conference, Muscat, Sultanate of Oman, 11-13 December 2018.
  26. Piya, S., Shamsuzzoha, A. and Khadem, M. 2018. Analyzing Supply Chain Complexity Drivers using Interpretive Structural Modelling, In: Proceedings of the 2nd European Conference on Industrial Engineering and Operations Management, Paris, France, 26-27 July 2018.
  27. Qamar S.Z., Arunachalam R., Pervez T. and Al-Kindi M. 2018. Knowledge-Based Goals in Engineering Design Courses. In: Proceedings of 28th Arab Engineering Education Conference, Muscat, Sultanate of Oman, 11-13 December 2018.  
  28. Rahman, M.S., Oukil, A., and Khadem, M. 2018. Estimation of Economic Loss Due to the Absence of Tanning Industry in Oman, In: Proceedings of the Sydney International Business Research Conference 2018, Sydney, Australia, 25-26 March 2018.
  29. Shamsuzzoha, A., Al-Kindi M. and Summad, E., Measurement of Innovation Performance in Selected Industries in Sultanate of Oman. In: Proceedings of the 8th International Conference on Industrial Engineering and Operations Management, Bandung, Indonesia, 6-8 March 2018.
  30. Shamsuzzoha, A., Khadem, M. and Piya, S. 2018. Study to Design and Develop an Entrepreneur Model: Perspectives from Tannery Industry in Oman, In: Proceedings of the 8th International Conference on Industrial Engineering and Operations Management, Bandung, Indonesia, 6-8 March 2018.
  31. Summad, E., Al-Kindi M. and Shamsuzzoha, A. 2018. Innovation Diffusion: Application of Agent-Based Modelling and Simulation in a Case Company in Sultanate of Oman. In: Proceedings of the 8th International Conference on Industrial Engineering and Operations Management, Bandung, Indonesia, 6-8 March 2018.
  32. Summad, E., Al-Kindi, M. and Piya, S. 2018. Towards a Knowledge-Based Economy: Realizing Innovation and Human Capital Potential. In: Proceedings of the 28th Arab Engineering Conference, Muscat, Sultanate of Oman, 11-13 December 2018.
  33. Summad, E., Al-Kindi, M., Shamsuzzoha, A., Piya, S. and Ibrahim, M.K. 2018. A Framework to Assess a Knowledge-Based Economy: Special Focus to Higher Educational Institutions. In: Proceedings of 2nd European Conference on Industrial Engineering and Operations Management. Paris, France, 26-27 July 2018.
  34. Tatar N., Gultekin H. and Gurel S. 2018. Energy Conscious Scheduling of Robot Moves in Dual-Gripper Robotic Cells, In: Proceedings of the 16th International Conference on Project Management and Scheduling, Rome, Italy, 17-20 April 2018.
  35. Triki, C. 2018. Enhancing the Carriers Synergy in the Full-Truck Transportation Industry. In: Proceedings of the International Conference on Industrial Engineering and Management Operations, Bandung, Indonesia, 6-8 March 2018.
  36. Zunaid, M., Murtaza, Q., Samsher and Husain, A. 2018. Numerical Analysis of Forced Draft Parallel Flow Shower Cooling Tower with Varying the Water to Air Mass Flow Ratio. In: Proceedings of International Conference on Advanced Production and Industrial Engineering, New Delhi, India, 5 October 2018.
  1. Abdo, J., Hassan, E. and Al-Shabibi, A. 2017. Fabrication of Experimental Setup for Investigation of Drillstring Fatigue Failure. In: Proceedings of the ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, ASME 2017 IDETC/CIE, Cleveland, OH, USA, 6-9 August 2017.
  2. Abdo, J., Hassan, E., Boulbrachene, K. and Kawk, J. 2017. Modeling and Experimental Investigation of Drill Pipe Failure. In: Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Tampa, Florida, USA, 3-9 November 2017.
  3. Abdul-Wahab, S.A. 2017. Study of the Indoor Air Quality in two Residential Houses according to their Ages. In: Proceedings of the International Conference on Chemical, Agricultural, Biological and Health Sciences (CABHS-2017), Bali, Indonesia, 2-3 February 2017.
  4. Ahamad, N.A., Kamangar, S., Salman, A.N.J., Manzoor, Elahi, M, Soudagar. and Khan, T.M.Y. 2017. Double Diffusion in Arbitrary Porous Cavity: Part II. In: Proceedings of the AIP Conference, Anthra Pradesh, India, 7–8 April 2017.
  5. Ahamad, N.A., Salman, A.N.J., Kamangar, S., Khan, T.M.Y. and Soudagar, M.E.M. 2017. Double Diffusion in Arbitrary Porous Cavity: Part III. In: Proceedings of the AIP Conference Proceedings, Anthra Pradesh, India, 7–8 April 2017.
  6. Al-Harrasi, A., Al-Ajmi, M., Al-Shidhani, M., Ambu-Saidi, M., Khadem M., Shamsuzzoha, A. and Piya, S. 2017. Modeling Supply Chain Network for a Poultry Industry in Oman: a Case Study. In: Proceedings of the International Conference on Industrial Engineering and Operations Management, Rabat, Morocco, 11-13 April 2017.
  7. Al-Harrasi, A., Qasida, A.A., Al-Qassabi, H. and Shamsuzzoha, A. 2017. Study of the Possibility to Industrial Symbiosis Within Selected Omani SMEs. In: Proceedings of the 10th International Conference on Thermal Engineering: Theory and Applications, Muscat, Oman, 26-28 February 2017.
  8. Arunachalam, R., Qamar, S.Z. and Al-Rawahi, N.Z. 2017. Engineering Design Education in an Activity- Based Learning Environment. In: Proceedings of the 8th International Conference on Engineering Education (IFEE2017), Sharjah, UAE, 18-20 April 2017
  9. Arunachalam, R., Raj, R.P., Mohan, S., Peter, L. and Prataap, R.K.V. 2017. Effect of Different Modes of Electrodeposition on the Morphology of Ruthenium Oxide Deposited From Ruthenium Nitrosylsulfate Electrolyte for Supercapacitor Applications. In: Proceedings of the XXXI International Conference on Surface Modification Technologies (SMT31), Mons, Belgium, 5-7 July, 2017.
  10. Ghodsi, M, Ziaiefar, H., Emam, S. and Alam, K. 2017. Development of Magnetostrictive Energy Harvester. In: Proceedings of the 10th International Conference on Thermal Engineering: Theory and Applications, Muscat, Sultanate of Oman, 26-28 February 2017.
  11. Halder, P., Varghese, F.A., Husain, A., Samad, A. 2017. A Numerical Analysis of Casing Groove Parameter on the Performance of Wave Energy Conversion Device. In: Proceedings of the International Conference on Thermal Engineering: Theoryand Applications, Muscat, Sultanate of Oman, 26-28 February 2017.
  12. Iqbal, M., Malek, A.B.M.A., Akhter, S. Howladar, M.F. and Shamsuzzoha, A. 2017. Study of Energy Utilization Scenario in Bangladesh. In: Proceedings of the 10th International Conference on Thermal Engineering: Theory and Applications, Muscat, Oman, 26-28 February 2017.
  13. Khan, R., Pervez, T., Qamar, S.Z. 2017. Constitutive Modeling of Martensitic Transformation in Twinning Induced Plasticity Steels subjected to Thermomechanical Load. In: Proceedings of the International Conference on Martensitic Transformations (ICOMAT 2017), Chicago, IL, USA, 9-14 July 2017.
  14. Lahti, J., Helo, P., Shamsuzzoha, A. and Phusavat, K. 2017. IoT in Electricity Supply Chain: Review and Evaluation. In: Proceedings of the 15th International Conference on ICT and Knowledge Engineering (ICT& KE 2017), Bangkok, Thailand, 22-24 November 2017.
  15. Manzoor, A., Elahi, M.S., Salman, A.N.J. and Badruddin, .A. 2017. Fem Formulation for Heat and Mass Transfer in Porous Medium. In: Proceedings of the International Conference on Materials, Alloys and Experimental Mechanics (ICMAEM-2017), Hyderabad, India, 3-4 July 2017.
  16. Mohammadzaheri, M., Ghodsi, M. and Qallaf, A. 2017. Development of a Radial Basis Function Network to Estimate the Head Generated by Electrical Submersible Pumps on Gaseous Petroleum Fluids. In: Proceedings of 7th International Conference on Artificial Intelligence, Soft Computing and Application, Sydney, Australia, 23-24 December 2017.
  17. Mohammadzaheri, M. and Qallaf, A. 2017. A Fuzzy Model to Esti te Head of Gaseous Petroleum Fluids Driven by Electrical Submersible Pumps. In: Proceedings of 13th Internati Conference on Engineering and Technology, Computer, Basic and Applied Sciences, Sydney, Australia, 19-20 August 2017.
  18. Mohammadzaheri, M., Firoozfar, A., Mehrabi, D. and Emadi, M. 2017. A Virtual Temperature Sensor for an Infrared Dryer. In: Proceedings of 9th IEEE GCC Conference, Manama, Bahrain, 8-11 May 2017.
  19. Mohammadzaheri, M. and Tafreshi, R. 2017. An Enhanced Smith Predictor Based Control System for Time-delay Processes. In: Proceedings of 9th IEEE GCC Conference, Manama, Bahrain, 8-11 May 2017.
  20. Mohammadzaheri, M., Doust-mohammadi, M., Amouzadeh, A., Jamshidi, E. and Emadi, M. 2017. Fault Detection of an Automobile Cylinder Head Using Mechanical Vibrations and Artificial Intelligence. In: Proceedings of 9th IEEE GCC Conference, Manama, Bahrain, 8-11 May 2017.
  21. Mohammadzaheri, M., Firoozfar, A., Mehrabi, D., Emadi, M. 2017. A Fuzzy Virtual Temperature Sensor for an Irradiative Enclosure. In: Proceedings of 10th International Conference on Thermal Engineering: Theory and Applications, Muscat, Oman, 26-28 February, 2017.
  22. Pervez, T. 2017. Trends and Approaches in Design and Development of Tailored Materials. Keynote Talk In: Emerging Trends in Automoti    Engineering (CETAE-2017), Karachi, Pakistan, 28-29 December 2017
  23. Pervez, T., Alzebdeh, K. and Al Kharusi, M.S. 2017. Effecti e Mechanical Properti s of Nanoscale Representati e Volume Element of CNT-based Nanocomposites. In: Proceedings of the Eleventh International Conference on Composite Science and Technology (ICCST/11), Sharjah, UAE, 4-6 April 2017.
  24. Qamar S.Z. and Pervez, T. 2017. Tool and Die Steels in Aluminum Extrusion and Tubular Expansion Applications. Keynote Address, In: Proceedings of the 3rd Euro Congress on Iron, Steel and Construction Engineering. London, UK, 16-17 November 2017.
  25. Qamar S.Z., Chekotu J.C. and Pervez, T. 2017. Mitigation of Major Product Defects in Aluminum Extrusion. Keynote Presentation, In: Proceedings of the 14th International Conference and Exhibition on Materials Science and Engineering, Las Vegas, Nevada, USA, 13-15 November 2017.
  26. Qamar, S.Z. 2017. Solid Expandable Tubulars; Full-Scale Testing and Analysis. Keynote Address, In: Proceedings of the International Conference on Geology and Geoscience, Dubai, UAE, 27-28 April, 2017.
  27. Qamar, S.Z. and Pervez, T. 2017. Elastomer Packers in Petroleum Drilling Operations: Changes in Swelling Response and Mechanical Properties. In: Proceedings of the International Conference on Geology and Geoscience, Dubai, UAE, 27-28 April 2017.
  28. Salman, A.N.J., Ahamad, N.A. and Khan, T.M.Y. 2017. Natural Convection Due To Heating of Small Block in Porous Medium. In: Proceedings of the International Conference on Materials, Alloys and Experimental Mechanics (ICMAEM-2017), Hyderabad, India, 3-4 July 2017.
  29. Salman, A.N.J., Azeem, K. and Khan, T.M.Y. 2017. Heat and Mass Transfer in an L Shaped Porous Medium, In: Proceedings of the International Conference on Materials, Alloys and Experimental Mechanics  (ICMAEM-2017),  Hyderabad,  India,  3-4  July  2017.
  30. Sayari L.M. and Zaier R. 2017. Dynamic Optimization of Matsuoka Oscillator. In: Proceedings of the International Conference on Numerical Analysis and Optimization. Oman, Muscat, 2-5 January 2017.
  31. Shamsuzzoha, A., Al-Kindi, M. and Al-Hinai, N. 2017. Application of Product Modularity in Industry: a Case Study. In: Proceedings of the International Conference on Industrial Engineering and Operations Management, Rabat, Morocco, 11-13 April 2017.
  32. Triki C., MirMohammadsadeghi S. and Piya S. 2017. Solving the Lane Selection Problem in Multi-Period Transportation Auctions. In: Proceedings of the 5th International Conference on Advances in Engineering and Technology, Singapore, 27-28 March, 2017.
  33. Zaier, R. El Dirdiry, O. and Sayari L.M. 2017. Design and Control of Biomechanical Leg for Enhanced Human Walking. In: Proceedings of the 5th International Conference on Control Engineering & Information Technology, Tunisia, Sousse, 17-19 December 2017.
  34. Zarog, M. 2017. SiC as a Promising material for MEMS/NEMS: A review. In: Proceedings of IASTEM International Conference on Mechanical and Aerospace Engineering (ICMAE), Marrakech, Morocco, 13-14 October 2017.
  35. Zunaid, M. and Husain, A. 2017. Numerical Heat Transfer Analysis of Wavy Micro-Channel at Different Reynolds Number. In: Proceedings of the International Conference on Advanced Production and Industrial Engineering, New Delhi, India, 6-7 October, 2017.
  1. Abbasher, S. and Al-Yahmedi, A. 2016. Efficient Walking of a Simple Biped With a Torso and Preferred Transition Speed. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS-Oman-2016), Muscat, Sultanate of Oman, 6-8 December 2016.

  2. Abdo, J., Hassan, E.M. and Kwak, J. 2016. Investigation of Drillstring Fatigue Failure Enhancing Drilling Efficiency by Utilizing Nanomaterials in Drilling Operations. In: Proceedings of the International Conference on Applied Mechanics and Industrial Engineering, Muscat, Oman, 6-8 December, 2016.

  3. Abdo, J., Hassan, E.M., Al-Shabibi, A. and Kwak, J. 2016. Design of Drilling Experimental Setup for Investigation of Drillstring Fatigue Failure. In: Proceedings of the International Conference on Applied Mechanics and Industrial Engineering, Muscat, Oman, 6-8 December 2016.

  4. Abdul-Wahab, S.A., Al-Rawas, G., Charabi, Y., Al-Wardy, M. and Fadlallah, S.O. 2016. Investigating the Key Sources of Odours in Al-Multaqa Village. In: Proceedings of the 63rd IIER International Conference. International Conference on Natural Science and Environment (ICNSE-16), Phuket, Thailand, 28 February 2016.

  5. Akhtar, M., Qamar S.Z., Muzamil, M., Nadeem, A. and Saifuddin, T. 2016. Effect of Heat Treatment on Mechanical and Impact Behavior of AC8H Aluminum Alloy. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS-Oman-2016), Muscat, Oman, 8-10 December 2016.

  6. Akhtar, M., Qamar. S.Z., Mehdi. S.M., Nadeem. A. 2016. Mechanics of Swelling in Elastomer with Diffusion in Low and High salinity Brine. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS-Oman-2016), Muscat, Oman, 8-10 December 2016.

  7. Alam, K., Ghodsi, M. and Silberschmidt, V.V. 2016. Experimental Study on the effect of Point Angle on Force and Temperature in Ultrasonically Assisted Bone Drilling. In: Proceedings of the 39th Canadian Medical and Biological Engineering Conference (CMBEC39), Canada. Calgary, 24-27 May 2016.

  8. Al-Azri, N. and Triki, C. 2016. Linear Programming Model for Optimizing Heat Integration in Chemical Processes. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems, Muscat, Oman, 6-8 December, 2016.

  9. Al-Azri, N., Al-Rawahi, N., Khodaee, A. and Husain, A. 2016. Linear Regression Models for the Thermodynamic Properties of Working Fluids in Waste Heat Recovery. In: Proceedings of the 4th International Conference on Renewable Energy: Generation and Applications (ICREGA 2016), Belfort, France, 8-10 February 2016.

  10. Al-Azri, N., Zurigat, Y. and Al-Rawahi, N. 2016. Bioclimatic Charts for Oman using Dry Bulb and Dew Point Temperatures. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS-Oman-2016), Sultanate of Oman, Muscat, 6-8 December 2016.

  11. Al-Janabi, A. 2016. Utilization of Electric Vehicle in Oman: Energy and Environment Enhancement. In: Proceedings of the 9th International Conference on Thermal Engineering: Theory and Applications, Abu Dhabi, United Arab Emirates, 24-26 March 2016.

  12. Al-Oufi, K.S., Al-Gheilani, H.J., Al-Hinai, A.S., Alyaqhdan, S., Al-Amri, Y.N. and Husain, A. 2016. Thermal Performance of Jet Impingement with Spent Flow Management. In: Proceedings of the ICAMIS-Oman-2016 International Conference on Applied Mechanics and Industrial Systems, Muscat, Oman, 6-8 December 2016.

  13. Al-Rawahi, H., Al-Zebdeh, K. and Nassar, M. 2016. Statistical Modeling ofMechanical Properties of Chopped Date Palm Frond Reinforced Polypropylene Composites. In: Proceedings of the International Conference on Materials Science and Engineering (IMS8th), American University of Sharjah, UAE, 2-3 February 2016.

  14. Al-Riyami, M., Ismail, N., Al-Azri, A. and Triki, C. 2016. A Matching Optimization Model for the Dynamic Ridesharing in a University Campus. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems, Muscat Oman, 6-8 December 2016.

  15. Al-Shabibi, A.M. 2016. Solar Water Deslination for Rural Areas. In: Proceedings of the 4th International Conference on Renewable Energy: Generation and Applications (ICREGA 2016), Belfort, France, 8-10 February 2016.

  16. Al-Shuaili, M., Al-Azri, N. and Al-Rawahi, N. 2016. Comparison of Ground and Satellite Weather Parameters Data for Muscat Oman. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS 16), Muscat, Oman, 6-8 December 2016.

  17. Al-Zebdeh, K. and Al-Nuaimi, A. 2016. The Effect of Shape of Reinforcement on Mechanical Properties of Random Composites. In: Proceedings of the International Conference on Materials Science and Engineering (IMS 8th), American University of Sharjah, UAE, 11-17 November 2016.

  18. Al-Zebdeh, K., Nassar, M., Al-Rawahi and H., Al-Hinai, N. 2016. Characterization of Mechanical Properties of Date Palm Fronds Reinforced Plastics Composites. In: Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition (IMECE2016), 2-3 February 2016.

  19. Amouzadeh, A., Doustmohammadi, M., Mohammadzaheri, M., Jamshidi, E., Emadi, M. and Parmoon, M. 2016. Fault Detection of an Automobile Cylinder Block through Intelligent Analysis of Modal Information. In: Proceedings of the First International Conference on New Research Achievements in Mechanics, Mechatronics and Biomechanics, Tehran, Iran, 26 May 2016.

  20. Ariz, M., Afzal, H., Al-Azri, N. and Al-Rawahi, N. 2016. Thermal Performance Analysis Of Hybrid Jet Impingement/Microchannel Cooling System for Densely Packed Concentrated Photovoltaic (CPV) Cells. In: Proceedings of the ASME International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM 2016), Washington DC, USA, 10-14 July 2016.

  21. El Dirdiry, O. and Zaier, R. 2016. A Biomechanical Leg Design with a Passive Toe-Joint. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems, Oman, Muscat, 6-8 December 2016.

  22. Fazil, S.A.I., Husain, A. and Benkari, N. 2016. Two and Four Sided Windcatchers Performance Evaluation using Numerical Analysis. In: ICAMIS-Oman-2016 International Conference on Applied Mechanics and Industrial Systems, Muscat, Oman, 6-8 December 2016.

  23. Ghodsi, M., Saleem, A., Ozer, A., Bahadur, I, Alam, K., Al-Yahmadi, A, Ghodsi, M.H, Hoshyarmanesh, H. and Sheykholeslami, M.R. 2016. Elimination of Thermal Instability in Precise Positioning of Galfenol Actuators. In: SPIE 9800, Behavior and Mechanics of Multifunctional Materials and Composites. USA, 16-18 April 2016.

  24. Ghodsi, M., Ziaiefar, H., Amiryan, M., Honarvar, F., Hojjat, Y., Mahmoudi, M., Al-Yahmadi, A. and Bahadur, I. 2016. Lamb Wave Feature Extraction using Discrete Wavelet Transformation and Principal Component Analysis. In: Proceedings of the SPIE 9804, Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure (pp. 98041F-98041F). International Society for Optics and Photonics, USA, 16-18 April 2016.

  25. Goher, K., Al-Harthi, S, Al-Rashdi, M., Al-Kindi, A., Al-Hadhrami, L. and Al-Yahmadi, A. 2016. Development of a Reconfigurable Wheelchair for Mobility and Rehabilitation. In: Proceedings of the 2016 IEEE-EMBS Conference on Biomedical Engineering and Sciences, The Pullman Bangsar, Kuala Lumpur, Malaysia, 4-8 December 2016.

  26. Halder, P., Varghese, F.A., Thampi, G.K.B.P., Husain, A. and Samad, A. 2016. Effect of Casing Groove Width on the Performance of Wells Turbine. In: Proceedings of the ICAMIS-Oman-2016 International Conference on Applied Mechanics and Industrial Systems, Muscat, Oman, 6-8 December 2016.

  27. Hassan, E.M. and Abdo, J. 2016. Experimental Study of Glass-Reinforced Epoxy (GRE) Pipes under Short-term High Pressure High Temperature (HPHT). In: Proceedings of the International Conference on Applied Mechanics and Industrial Engineering, Muscat, Oman, 6-8 December 2016..

  28. Helo, P., Shamsuzzoha, A. and Sandhu, M. 2016. Cloud-based Virtual Supply Chain. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, 23-25 September 2016.

  29. Husain, A., Ariz, M., Al-Rawahi, N.Z.H. and Ansari, M.Z. 2016. Thermal Performance Analysis of Hybrid Jet Impingement/Microchannel Cooling for Concentrated Photovoltaic (CPV) Cells. In: Proceedings of the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Washington D.C., 10-14 July 2016.

  30. Iqbal, M., Karim, M.A., Mesbah, S., Ahmad, I., Akhter, S. and Shamsuzzoha, A. 2016. Study of Occupational Health Hazards of Selected Tea Gardens in Bangladesh. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS-OMAN-2016), Sultanate of Oman, 6-8 December 2016.

  31. Jahwari, F.A. and Naguib, H.E. 2016. Microstructure-property Relationship for Impact Energy Absorption of Functionally Graded Porous Structures of Acrylonitrile Butadiene Styrene (ABS). In: Proceedings of the ANTEC 2016 Society of Plastics Engineers, Indianapolis, USA, 23-25, May 2016.

  32. Khadem, M. 2016. Occupational Health and Safety Issues Affecting Worker Performance in Omani Industries. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, 8-10 March 2016.

  33. Khan, F.A., Huda, N., Husain, A., Hamdan, M.O. and Ansari M.A. 2016. Split and Recombination Micromixer with Offset Inlets. In: Proceedings of the RAME-2016 Recent Advances in Mechanical Engineering, New Delhi, India, 14-15 October 2016.

  34. Kumar, K.P., Arunachalam, R., Majumder, M.C., Murali, R.V. and Al Mufargi, S. 2016. Effect of Stirrer Design on the Particle Distribution in Stir Casting using Experimental and Computational Fluid Dynamics. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS). Muscat, 6-8 December 2016.

  35. Lahti, J., Helo, P., Shamsuzzoha, A. and Phusavat, K. 2016. Big Data is Evolving Energy Supply Chains. In: Proceedings of the 14th International Conference on ICT and Knowledge Engineering, Bangkok, Thailand, 23-25 November 2016.

  36. Maimani, A., Mamari, A., Hasani, R. and Piya, S. 2016. Designing Optimum Personalized Tourism Packages by Means of Solving Multi-objective Functions. In: Proceedings of the International Conference on Applied Mechanics and Industrial System, Muscat, Oman, 6-8 December 2016.

  37. Mathilde, M., Al-Azri, N., Ombe-Ndeffotsing, A., Wey, E. and Wald, L. 2016. Evaluating Regional Change in Performance of Several Databases in Arabic Peninsula. In: Proceedings of the 16th European Meteorological Society Annual Meeting, 11th European Conference on Applied Climatology (ECAC), Trieste, Italy, 12-16 September 2016.

  38. MirMohammedSadeghi, S., Triki C. and Piya S. 2016. Simulated Annealing for Solving the Multi-Period Shipper's Lane Selection Problem. In: Proceedings of the 6th International Conference on Information Systems, Logistics and Supply Chain, Bordeaux (France), 2-4 June 2016.

  39. Mohammadzaheri M. and Tafreshi, R. 2016. An Enhanced Smith Predictor Based Control System for Time-delay Processes. In: Proceedings of International Conference on Applied Mechanics and Industrial Systems. Muscat, Oman, 6-8 December 2016.

  40. Mohammadzaheri M., Tafreshi R., Khan Z., Francheck M. and Grigoriadis K. 2016. Analytical-numerical Investigation of Factors Influencing Overall Heat Transfer Coefficient of Multiphase Petroleum Fluids in Horizontal Subsea Pipelines. In: Proceedings of International Conference on Applied Mechanics and Industrial Systems, Muscat, Oman, 6-8 December 2016.

  41. Mohammadzaheri, M. 2016. Nanopositioning, Current State, Future Perspective. In: Proceedings of the First Kuwait International Nanotechnology Conference and Exhibition, Kuwait, 9-11 February 2016.

  42. Nassar, M., Al-Zebdeh, K. and Al-Rawahi, H. 2016. Characterization of Mechanical Properties of Date Palm Fronds Reinforced Low Density Polyethylene (LDPE). In: Proceeding of International Conference on Materials Science and Engineering (IMS 8th), American University of Sharjah, UAE, 2-3 February 2016.

  43. Pervez, T. and Qamar, S.Z. 2016. Swelling Elastomer Seal Design for Irregular Shaped Boreholes: Experimental and Simulation Studies. In: Proceedings of International Conference on Applied Mechanics and Industrial Systems (ICAMIS-Oman-2016), Muscat, Oman, 6-8 December 2016.

  44. Pervez, T., Qamar, S.Z. and Al-Abri, O.S. 2016. Testing of Combined Fast-Swell and Low-Salinity Elastomers under Replication of Oil-Field Conditions. In: Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition (IMECE2016), IMECE2016-68474, Phoenix, Arizona, USA, 11-18 November, 2016.

  45. Piya, S., Khadem, M. and Shamsuzzoha, A. 2016. Identification of Critical Factors and Their Interrelationships to Measure Supply Chain Agility Level: Cases from Omani Oil and Gas Industries. In: Proceedings of the 13th International Conference on Industrial Management. Hiroshima, Japan, 21-23 September 2016.

  46. Qamar S.Z., Arunachalam, R. and Al-Rawahi N.Z. 2016. Teaching Product Design in Line with Bloom’s Taxonomy and ABET Student Outcomes. In: Proceedings of the IEEE EDUCON-2016 Global Engineering Education Conference, Abu Dhabi, UAE, 10-13 April 2016.

  47. Qamar, S.Z. 2016. Best Practices in Higher Education; an Engineer’s Perspective. In: Proceedings of the 4th International Conference of the College of Education, Sultan Qaboos University, Muscat, Oman, 14-17 November 2016.

  48. Qamar, S.Z. 2016. Effective Engineering Education - Emerging Techniques. In: Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT 2016), Kuala Lumpur, Malaysia, 8-11 November 2016.

  49. Qamar, S.Z. 2016. Modeling and Analysis of Extrusion Process, Product and Tooling: Estimation and Prediction of Die Life. In: Proceedings of the 17th International Conference on Applied Mechanics and Mechanical Engineering (AMME-2016), Military Technical College, Cairo, Egypt, 19-21 April 2016.

  50. Qamar, S.Z. 2016. Performance Analysis of Swelling Elastomers in Petroleum Applications: Elastomer Testing and Characterization at Sultan Qaboos University. In: Proceedings of the 8th International Conference on Materials Science and Engineering (IMS 8), American University of Sharjah, Sharjah, UAE, 2-4 February 2016.

  51. Qamar, S.Z. 2016. Product Defects in Commercial Aluminum Extrusion: Review and Analysis. In: Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT 2016), Kuala Lumpur, Malaysia, 8-11 November 2016.

  52. Qamar, S.Z., Chekotu, J.C., Al-Maharbi, M., Alam, K. 2016. A Review of Shape Complexity in Metal Forming. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS-Oman-2016), Muscat, Oman, 8-10 December 2016.

  53. Saleem, A., Ghodsi, M., Mesbah, M. and Ozer, A. 2016. Model Identification of Terfenol-D Magnetostrictive Actuator for Precise Positioning Control. In: Proceedings of the SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, Las Vegas, USA, 16-18 April 2016.

  54. Sarebandi, M.S., Ghodsi, M., Hojjat, Y. and Sadeghian, H. 2016. Design and Fabrication of a Drop-on-Demand Metallic Droplet Generator. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems, Muscat, Oman, 6-8 December 2016.

  55. Sayari, L.M. and Zaier, R. 2016. Optimal Control of ZMP Trajectory for Humanoid Locomotion. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems, Oman, Muscat, 6-8 December 2016.

  56. Shamsuzzoha, A., Al-Kindi, M., Khadem, M., Helo, P. and Sandhu, M. 2016. Open Innovation through Virtual Business Network: Perspective from Small and Medium Enterprises. In: Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, Detroit, Michigan, USA, 23-25 September 2016.

  57. Shamsuzzoha, A., Helo, P. and Al-Kindi, M. 2016. Implementation of Cloud-based Manufacturing Environment to Facilitate Virtual Collaboration between Industries. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS-OMAN-2016), Sultanate of Oman, 6-8 December 2016.

  58. Sheykholeslami, M.R., Ghodsi, M., Hojjat, Y., Sadeghian, H. and Cinquemani, S. 2016. On the Use of Giant Magnetostrictive Materials in Sonic Transducers for Liquid Atomizers. In: Proceedings of the SPIE Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring, Las Vegas, USA, 16-18 April 2016.

  59. Sheykholeslami, M.R., Hojjat, Y., Ansari, S., Cinquemani, S. and Ghodsi, M. 2016. Analytical Model of a Giant Magnetostrictive Resonance Transducer. In: Proceedings of the SPIE Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring, Las Vegas, USA, 16-18 April 2016.

  60. Siddique, M.H., Manayilthodiyil, S., Husain, A., Samad, A. and Kenyery, F. 2016. Numerical Analysis of Fluid Flow through an Electrical Submersible Pump for Handling Viscous Liquid. In: Proceedings of the ASME 2016 Fluids Engineering Division Summer Meeting, Washington D.C., 10-14 July 2016.

  61. Triki C., Al-Hinai N., Kaabachi I. and Krichen S. 2016. Towards Combining the Periodic Petroleum Station Replenishment Problem within a Combinatorial Auction Framework in Oman. In: Proceedings of the 12th International Industrial Engineering Conference, Tehran (Iran), 25-26 January 2016.

  62. Triki, C., Akil, J. and Kobayashi, Y. 2016. Optimization Models for the Synergy Maximization in the Transportation Networks. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems, Muscat (Oman), 6-8 December 2016.

  63. Vaiphei, S.K.L., Chandrasekaran, M., Teyi, N., Arunachalam, R. and Debbarma, J. 2016. Experimental Investigation and Evaluation of Process Parameters in WEDM of Al- 6061alloy/1.5%Sic/0.5%B4C Hybrid Nano MMCs. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS). Muscat, 6-8 December 2016.

  64. Zaier, R. and Sayari, L.M. 2016. Repetitive Control of ZMP Trajectory for Humanoid Robot. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems, Oman, Muscat, 6-8 December 2016.

  65. Zunaid, M., Husain, A., Jindal, A. and Gupchup, A. 2016. CFD Analysis of Wavy Edge Rectangular Micro-Channel Heat Sink at Different Reynolds Numbers. In: Proceedings of the RAME-2016 Recent Advances in Mechanical Engineering, New Delhi, India, 14-15 October 2016.

  66. Zurigat, Y., Al-Azri, N. and Al-Rawahi, N. 2016. Bioclimatic Chart and Comfort Zone Potential in Buildings Cooling in Sharjah City, UAE. In: Proceedings of the International Conference on Applied Mechanics and Industrial Systems (ICAMIS 16), Muscat, Oman, 6-8 December 2016.

 

1.       Abdo, J.  Sharji H. 2015. Effect of Nano-Sepiolite on Rheological Properties and Filtration Loss of Water-Based Drilling Fluids. 16th European Conference on Applications of Surface and Interface Analysis 2015,  ECASIA’15, Granada, Spain, 28 September - 1 October, 2015.

2.       Abdo, J.  Sharji H. 2015. Fatigue Failure Investigation of Drillstring. Tribology Frontiers Conference, Denver, Colorado, USA, 25-27 October 2015.

3.       Abdul-Wahab, S.A. and Fadlallah, S.O. 2015. Vehicle Emissions from Sultan Qaboos University in Oman: Line Source Case Study. In: Proceedings of the 2015 International Conference on Biological and Environmental Science (BIOES-15), Phuket, Thailand, 1-3 October 2015.

4.       Abu Mohareb, O., Huynh, P., Al-Janabi, A., Grimm, M. and Reuss, H. 2015. Electric Vehicles in the Gulf Region: In: Performance and Potential. SAE 2015 World Congress, Detroit, Michigan, USA, 21-23 April 2015.

5.       Ahmadi, L., Panah, P.Y., Elkamel, A., Abdul-Wahab, S., Croiset, E., Douglas, P., Al-Adwani, S. and Entchev, E. 2015. Zonal Analysis of Phevs/Evs Penetration: A Mean to Mitigate Vehicle Emissions. In: Proceedings of the 5th International Conference on Industrial Engineering and Operations Management (IEOM 2015), Dubai, United Arab Emirates, 3-5 March 2015.

6.       Al Lawati, M. and Nielsen, C. 2015. Hybrid Virtual Holonomic Constraints for a 2-DOF Bipedal Robot.  In: IEEE 28th Canadian Conference on Electrical and Computer Engineering, Canada. Halifax, 3-6 May 2015.

7.       Al Shabibi, A. M. 2015. Numerical Solution for Tubular Expansion of Curved Pipe, International Conference on computational and experimental engineering and sciences, Reno, Nevada, USA, 20-24 July 2015.

8.       Al Shabibi, A. M. and Tahat, M. 2015. Effect of Basin Geometry on Solar Still Thermal Performance, International Conference on Renewable Energies and Power Quality, La Coruna, Spain, 25-27 March 2015.

9.       Al-Abri, O.S., Pervez, T. and Al-Maharbi, M. 2015. Mechanical and Microstructural Changes of Fine Grained C-Mn Steel Tubular Undergoing Down-hole Cold Expansion Process. IMECE2015-51568. In: Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE2015), Houston, Texas, USA, 13-20 November, 2015.

10.    Al-Azri, N., Al-Saadi, S. 2015. The Effect of Variations in Typical Reference Year on Energy Analysis and Simulation for Residential Buildings. In: Proceedings of the 5th International Conference on Energy and Environmental Science (ICEES 2015). Penang, Malaysia, 3-4 September 2015.

11.    Al-Dhamri, H., Black, L. and Abdul-Wahab, S.A. 2015. Oil-based Mud Cutting as an Additional Raw Material in Clinker Production: The Impact on Phase Composition. In: Proceedings of the 14th International Congress on the Chemistry of Cement (ICCC 2015), Beijing, China, 13-16 October 2015. 

12.    Al-Hinai, N., and Piya, S. 2015. Jobshop Scheduling For Skill-Dependent Make-To-Order System. In: Industrial Engineering and Operations Management (IEOM), 2015 International Conference. pp.1-5, Dubai, 3-5 March 2015..

13.    Al-Maamari, M., Al-Badi, S., Saleem, A., Mesbah, M. and Hassan E. 2015. Design of a Brain Controlled Hand Exoskeleton for Patients with Motor Neuron Diseases, In: Proceedings of the 10th International Symposium on Mechatronics and its Applications, (7pp), Sharjah, United Arab Emirates, 8-10 December 2015.

14.    Aloulou M. A., Fu L. L. and Triki C. 2015. Coordination D’ordonnancement de Production et de Distribution Aval Avec des Temps de Réglage et des Fenêtres de Temps de Livraison. In : Proceedings of the 16ème Conférence ROADEF Société Française de Recherche Opérationnelle et Aide à la Décision, Marseille (France), 2015.

15.    Al-Rawahi, N., Myint, M.T. and Dutta, J. 2015. Experimental Study on Enhancement of Heat Transfer Using Nanoparticles Based Fluids. In: Proceedings of the 25th Canadian Congress of Applied Mechanics (CANCAM2015) London, Ontario, Canada, May 31 - June 4, 2015.

16.    Ariz, M., Huda, N., Husain, A., 2015. Thermal Performance Analysis of Jet Impingement with Effusion Scheme, In: International Conference on Computational Heat and Mass Transfer-2015. NIT Warangal, Nov. 30- Dec. 2, 2015.

17.    Arunachalam, R., Al-Ahmad, M., Maharaja, J., Mohan, S. and Al-Hinai, A.T.  Nanostructured Ruthenium Oxide Electrodes for Supercapacitor Applications. In: Proceedings of the 23rd International Conference on Materials and Technology, Portorož, Slovenia, 28-30 September 2015.

18.    Arunachalam, R., Al-Maharbi, M., Al-Kiyumi, Y., Al-Thani, E. and Al-Mafraji, M. 2015. Production of Metal Matrix Composite Using a Bottom Tapping Stir Casting Furnace. In: Proceedings of the International Conference on Advances in Engineering Materials (ICAEM 2015), Jupiter, Romania, 27-30 June 2015. 

19.    Boukhris Y., Al-Azri, N., Allani, Y. 2015. Solar Power Generation and Solar Cooling Trigeneration: A New Approach of Conceptual Design for Countries of Mena Region. In: Proceedings of the International Conference on Future Building & District Sustainability from Nano to Urban Scale (CISBAT2015). Lausanne, Switzerland, 9-11 September 2015.

20.    Boukhris, Y., Allani, Y., Al-Azri, N., Abdallah Saad, Z. 2015.A New Intelligent Predictive Solar-Gas Trigeneration System for Air Conditioning Industrial Spaces. In: Proceedings of the International Conference on Future Building & District Sustainability from Nano to Urban Scale (CISBAT2015). Lausanne, Switzerland, 9-11 September 2015.

21.    Fu L. L., Aloulou M. A. and Triki C. 2015. Coordination Integrated Production and Outbound Distribution Scheduling Problem with Setup Times and Delivery Time Windows. In: Proceedings of the Multidisciplinary International Scheduling Conference MISTA 2015, Prague (Czech Republic), 2015.

22.    Garbie, I.H. 2015. Assessment the Awareness of Sustainable Development in Manufacturing Enterprises. In: Proceedings of the Industrial and Systems Engineering Research Conference, Nashville, Tennessee, USA, May 30- June 2, 2015.

23.    Garbie, I.H. 2015. Creating Index for Sustainability/Sustainable Development in an Industrial Estate. In: CIE45 Proceedings, Metz, France, 28-30 October 2015.

24.    Garbie, I.H. 2015. Sustainability Analysis and Evaluation in Oil and Gas Industry. In: Proceedings of the Industrial and Systems Engineering Research Conference, Nashville, Tennessee, USA, May 30- June 2, 2015.

25.    Hao, Y., Helo, P. and Shamsuzzoha, A. 2015. Implementation of Cloud-Based Data Exchange and Messaging Platform within Virtual Factory Environment. In: Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2015), Singapore, 6-9 December 2015.   

26.    Hassan, E.M. and Abdo, J.  2015. Development of Testing Facility to Investigate GRE Pipes Behavior In Harsh Environment. In: Proceedings of the 10th International Conference on Composite Science and Technology (ICCST/10), (10pp), Lisbon, Portugal, 2–4 September 2015.

27.    Husain, A., Al-Azri, N.A., Samad, A., Kim, S.M., Kim, K.Y. 2015. Spent Flow Effects in Multiple Micro-Jet Impingement Cooling. In: Proceedings of the ASME-JSME-KSME 2015 Joint Fluids Engineering Conference. Microfluidic Summer Forum 2015. COEX, Seoul, Korea, 26-31 July 2015.

28.    Khan, R., Pervez, T. and Al-Abri, O.S. 2015. Modeling and Simulations of Transformation and Twinning Induced Plasticity in Advanced High Strength Austenitic Steels. IMECE2015-51953. In: Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE2015), Houston, Texas, USA, 13-20 November 2015.

29.    Lahti, J., Helo, P. and Shamsuzzoha, A. 2015. Information System of Fractional Owned Virtual Hydropower System. In: Proceedings of the 13th International Conference on ICT and Knowledge Engineering, Bangkok, Thailand, 18-20 November 2015.

30.    Özer, A., Ghodsi, M., Sekiguchi, A., Saleem, A., Al-Sabari, M.N. 2015. Finite Element and Experimental Evaluation of a Beam-type Twin Dynamic Vibration Absorber.  In: Proceedings of the ICENS. Waseda University, Tokyo, Japan, 22-24 July 2015.

31.    Pervez T., Al-Abri, O.S., Qamar, S.Z. 2015. Minimization of Pop-out Phenomenon Effect in Down-hole Tubular Expansion. In: ASME-2015 International Mechanical Engineering Congress and Exhibition (IMECE-2015), Houston, Texas, USA, 13-19 November 2015.

32.    Piya, S. and Shamsuzzoha A. 2015. Performance Evaluation of Order Acceptance Decision under Static and Dynamic Settings. In: Proceedings of the XXII International Conference on Industrial Engineering and Operations Management, Aviero, Portugal, 6 - 8 July 2015.

33.    Qamar S.Z. 2015. Extrusion Shape Complexity: A Research/Industry Review. Invited Paper. In: International Conference on Mechanical Engineering and Advanced Materials (ICME-AM 2015), Kota Kinabalu, Sabah, Malaysia, 3-4 December 2015.

34.    Qamar S.Z., Arunachalam R., Al-Rawahi N.Z. 2015. Teaching Product Design in Line with Bloom’s Taxonomy and ABET Student Outcomes. Accepted for presentation at IEEE EDUCON2016 Global Engineering Education Conference, Abu Dhabi, UAE, 10-13 April 2015.

35.    Qamar, S.Z., Pervez, T. and Akhtar, M. 2015. Behavior of Swelling Elastomers in Water, Oil, and Acid. In: TMS-2015 144th Annual Meeting and Exhibition, Orlando, USA, 15-19 March 2015.

36.    Sayari, M.A., Al-Yahmedi, A. and Masmoudi,N. 2015.  Gait and Posture Responses to Backpack Load, In: ECCOMAS Thematic Conference on Multibody Dynamics, Barcelona, Catalonia, Spain, 29 June - 2 July, 2015.

37.    Shamsuzzoha, A. and Helo, P. 2015. Business Collaboration – An Approach Towards end-to-end ICT Solutions for Virtual Factory. In: Proceedings of the IFIP WG5.1 12th International Conference on Product Life Cycle Management (PLM 2015), Doha, Qatar, 19-21 October 2015.   

38.    Shamsuzzoha, A. and Helo, P. 2015. Collaborative Processes within Virtual Manufacturing Business Networks: How Smes Can be Benefited?. In: Proceedings of the Fifth International Conference on Industrial Engineering and Operations Management (IEOM 2015), Dubai, UAE, pp. 2194-2198, 3-5 March 2015.

39.    Shamsuzzoha, A., Al-Maskari, F., Al-Lawati, S., Al-Adawi, M., Al-Tamimi, M., Al-Hinai, N. and Al-Kindi, M. 2015. Measurement of Modularity Level within Selected Omani Small and Medium Size Enterprises. In: Proceedings of the 17th International Dependency and Structure Modeling Conference, DSM 2015, Fort Worth, Texas, USA, 4-6 November 2015.

40.    Shamsuzzoha, A., Ehrs, M., Addo-Tengkorang, R. and Helo, P. 2015. Tracking and Tracing of Global Supply Chain Network: Case Study from a Finnish Company. In: Proceedings of the 17th International Conference on Enterprise Information Systems (ICEIS 2015), Barcelona, Spain, 27-30 April 2015.

41.    Shamsuzzoha, A., Sandhu, M. and Helo, P. 2015. Enabling Business Process Monitoring Through Peer-To-Peer Information Exchange in a Virtual Enterprise Environment. In: Proceedings of the 4th International Conference on Virtual and Networked Organizations Emergent Technologies and Tools (ViNOrg’15), Povoa de Varzim, Portugal, 18-20 November 2015.

42.    Sheykholeslami, M.R., Hojjat, Y., Cinquemani, S. and Ghodsi, M. 2015. Design and Simulation of Multi-resonance Sonic Transducer using Terfenol-D, in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, Jerome P. Lynch, Editors, In: Proceedings of SPIE Vol. 9435 (SPIE, Bellingham, WA 2015), 94353G, 2015.

43.    Sheykholeslami, M.R., Hojjat, Y., Cinquemani, S. and Ghodsi, M. 2015. Comparative Discussion between First and Second Modes of Terfenol-D Transducer, In Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, Jerome P. Lynch, Editors, In: Proceedings of SPIE Vol. 9435 (SPIE, Bellingham, WA 2015), 94353H, 2015.                               

44.    Triki C., Al-Hinai N., Kaabachi I., Jriji D. and Krichen S. 2015. A Periodic Petrolium Station Replenishment Problem: The Case of Oman. In: Proceedings of the IEE CIPLS 2015 Conference, Cape Town (South Africa), 2015.

45.    Zaier R., Zekri S., Jayasuriya H., Teirab A., Hamza N. and Al-Busaidi H. 2015. Design and Implementation of Smart Irrigation System for Groundwater Use at Farm Scale.  In: Proceedings of the The 7th International Conference on Modelling, Identification and Control (ICMIC 2015), Tunisia. Sousse, 18-20 December 2015.


  1. Abdo, J., Al-Anqodi, I. and Al-Sharji, H. 2014. Experimental Evaluations for the Effects of Amplitude and Frequency of Vibration on the Friction of Coiled Tubing in Hydrocarbon Drilling Operations. Paper DETC2014-34124, In: ASME 2014 International Design & Engineering Technical Conferences and Computers & Information in Engineering IDETC/CIE2014, Buffalo, New York, USA, 17-20 August 2014.
  2. Abdo, J., Al-Anqodi, I. and Al-Sharji, H. 2014. Investigation of Inducing Vibration to Reduce Friction of Coiled Tubing in Deep Drilling Operations. Paper IMECE2014-40007, In: ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014, Montreal, CANADA, 14-20 November 2014.
  3. Abdul-Wahab, S.A. and Fadlallah, S.O. 2014. Modeling of CO, NOx and CO2 due to Vehicle Emissions from Sultan Qaboos University in Oman. In: Proceedings of the 3rd Technical Conference on Hydraulic Engineering (CHE 2014). Hong Kong, China, 13-14 December 2014.
  4. Al Hinai, N., Khadem, M. and Al Kindi, M. 2014. Improve the Health Care Service and Patients Flow at Ophthalmology Clinic at Sultan Qaboos University Hospital Using Six Sigma. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, Bali, Indonesia, 7-9 January 2014.
  5. Al Kharousi, M., Alzebdeh, K. and Pervez, T. 2014. Effect of Chirality and Geometry on the Young’s Modulus of Graphene Structure Using Spring Based Finite Element Approach, In: the ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Canada, 14-20. November 2014.
  6. Al Kindi, M. 2014. Framework to Implement Six Sigma Methodology to Oil and Gas Drilling Budget Estimation. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, 7-9 January 2014.
  7. Al Kindi, M. 2014. Time-to-Market and Product Quality Trade-off. In: The Third International Conference on Numerical Analysis and Optimization, 2014.
  8. Al Shabibi, A.M. 2014. Analytical and Numerical Solution for Tubular Expansion Using Non-Flat Conical Mandrel. International Conference on Computational and Experimental Engineering and Sciences, Changwon, Korea, 12-17 June 2014.
  9. Al Shabibi, A.M. and Tahat, M. 2014. Designing a Single Slope Solar Water Still and Testing it in Omani Climate. International Conference on Renewable Energies and Power Quality, Cordoba, Spain, 8-10 April 2014.
  10. Al Shabibi, A.M. and Tahat, M. 2014. Thermal Performance of a Single Slope Solar Water Still with Enhanced Solar Heating System. International Conference on Desalination, Environment and Marine Outfall Systems, Muscat, Oman, 13-16 April 2014.
  11. Al Yahmedi, A. S. and Sayari, M. A. 2014. Efficient Walking of a Simple Biped with a Torso. In: Middle East Conference on Biomedical Engineering, Doha, Qatar, 17-20, February 2014.
  12. Al Yahmedi, A.S. and Sayari, M. A. 2014. Optimal Bipedal Robot Walking on an Inclined Surface. In: 17th IASTED International Conference on Robotics Applications, RA2014, Zurich, Switzerland, 23-25 June 2014.
  13. Al-Abri, O.S., Pervez, T., Khan, R. and Qamar, S.Z. 2014. Experimental Investigation of Mechanically Induced Martensitic Transformation in Expandable Steel. In: Proceedings of International Conference on Martensitic Transformations, (ICOMAT2014), Bilbao, Spain, 6-11 July 2014.
  14. Al-Azri, N. 2014. Algorithmic Procedure for Heat Integration Using Pinch Technology. In: Proceedings of the International Conference on Numerical Analysis and Optimization. Muscat, Oman, January 5-9, 2014.
  15. Al-Azri, N. 2014. Pinch Technology for Large Scale Engineering Applications.  In: Proceedings of the Annual Conference on Engineering and Technology (ACEAT). Osaka, Japan, 15-17 October 2014.
  16. Al-Hinai, N., Al-Naabi, O., Al-Dhamri, M. and Al-Hadhrami, S. 2014. Practical Approach for Improving and Scheduling Organizational Public Bus Transportation Systems. In: The 2014 Industrial and Systems Engineering Research Conference, Canada, Montreal, May 31-Jun 3, 2014.
  17. Al-Kharusi, M.S.M., Pervez, T. and Al-Zebdeh, K. 2014. Effect of Chirality and Geometry on the Young’s Modulus of Graphene Structure Using Spring Based Finite Element Approach. In: Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-37972, Montreal, Canada, 14-20 November 2014.
  18. Al-Kindi, N., Al-Rawahi, N., Dutta, J. and Myint, M.T.  2014. Heat Transfer Efficiency Using Zinc Oxide (Zno) & Aluminum Oxide (Al2O3) Nanoparticles Based Fluid.  In: Proceedings of the Annual Conference on Engineering and Technology (ACEAT 2014), Japan. Osaka, 15-17 October 2014.
  19. Arunachalam, R., Qamar, S.Z., Al Shidhani, A.S., Al Musallami, A.S. and Al Hadrami, M.S. 2014. Design for Quality in the Concept Generation Phase of the Product Design Process. In: Proceedings of the 58th Ilmenau Scientific Colloquium (58th IWK), Germany. Ilmenau, 8–12 September 2014.
  20. Ferreira, F., Shamsuzzoha, A., Azevedo, A. and Helo, P. 2014. Predictive Industrial Maintenance: A Collaborative Approach. In: Proceedings of the ‘Workshop on ICT Services and Interoperability for Manufacturing’ jointly hold under I-ESA’14 (7thInternational Conference on Interoperability for Enterprise Systems and Applications), Albi, France, 24-28 March, 2014.
  21. Garbie, I.H. 2014. Assessing Sustainability Practices and Implementation in Manufacturing Firms.  In: Proceedings of the CIE 44 & IMSS’14 Conference.  Turkey, Istanbul, 14-16 October 2014.
  22. Garbie, I.H. 2014. Sustainability Optimization in Manufacturing Enterprises. In: Proceedings of the 12th Global Conference on Sustainable Manufacturing (GCSM), Malaysia, Johor Bahru, 22-24 September 2014.
  23. Ghodsi, M., Ozer, A., Al-Yahmadi, A., Rajabzadeh, H., Hosseinzadeh, N. and Varzeghani N.G. 2014. Development of Gasoline Direct Injector Using Giant Magnetostrictive Materials. In: 3rd International Conference on Renewable Energy Research and Applications (ICRERA 2014), Milwaukee, USA, October 2014.
  24. Ghodsi, M., Ozer, Al-Yahmadi, A., Hosseinzadeh, N.A. and Zadega, M.N. 2014. Design, Sensitivity Analysis and Fabrication of DC Linear Direct-Drive Motor (LDDM). In: The 3rd International Conference on Renewable Energy Research and Applications (ICRERA 2014), Milwaukee, USA, October 2014.
  25. Hao, Y., Shamsuzzoha, A. and Helo, P. 2014. An Enterprise System Virtual Factories Platform for Collaborative Business Environment. In: Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2014). Selangor, Malaysia, 9-12 December, 2014.
  26. Hassan, E.M. and Kalamkarov, A.L. 2014. Micromechanics Modeling of 3D Network Smart Orthotropic Structures. In: XII International Conference on Composite MaterialsWorld Academy of Science, Engineering and Technology, UAE, Dubai, 25-26 December 2014.
  27. Hossain, M. and Khadem, M. 2014. Relationship between Supplier Integration and Supply Management Performance of Small and Medium Enterprises in Oman. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, Bali, Indonesia, 7-9 January 2014.
  28. Husain, A., and Kim, K.Y. 2014. Enhanced Multi-objective Optimization of Microchannel Heat Sink. In: Proceedings of Third International Conference on Numerical Analysis and Optimization, Muscat, Oman, 5-9 January 2014.
  29. Husain, A., Kim, J.-H. and Kim, K.Y. 2014. Thermal Characterization of Multiple Micro-Jet Impingement Cooling Model. In: Proceedings of the ASME 2014 12th International conference on Nanochannels, Microchannels, and Minichannels, Chicago, IL, USA, 3-7 August 2014.
  30. Iqbal, M., Ahmad, S. and Shamsuzzoha, A. 2014. Inventory Reduction by Applying Inventory Management Tools of a Selected Tannery Factory. In: Proceedings of the 4th International Conference on Industrial Engineering and Operations Management. Bali, Indonesia, 7-9 January 2014.
  31. Jayasuriya, H., Zekri, S., Zaier, R., Al-Busaidi, H., Hamza, N. and Teirab, A. 2014. Evaluation of a Sensor-based Precision Irrigation System for Efficiency and to Monitor and Control Groundwater Over-pumping in Oman, In: The 12th International Conference on Precision Agriculture, California (USA), 2014.
  32. Khadem, M., Islam, M.A. and Al Kindi, M. 2014. A Review on Occupational Health and Safety Risks in Micro and Small-Scale Enterprises (MSES) in Oman. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, Bali, Indonesia, 7-9 January 2014.
  33. Khan, R., Pervez, T., Al-Abri, O.S. and Qamar, S.Z. 2014. Modeling of Twinning Based Plasticity Phenomenon in Austenite Dominated Steels under Combined Loading. In: Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-37104, Montreal, Canada, 14-20 November 2014.
  34. Lahti, J., Helo, P. and Shamsuzzoha, A. 2014. Roles of ICT-systems for Electricity Providers Decision Support. In: Proceedings of the 12th International Conference on ICT and Knowledge Engineering. Bangkok, Thailand, 18-21 November 2014.
  35. Lawati, M., Kiyumi, R. and Piya, S. 2014. Production planning with hierarchical workforce for make-to-order system. In: 3rdNumerical and Optimization Conference, January 5-9, SQU, Muscat, Oman, (Abstract and Presentation), 2014.
  36. Ozer, A., Ghodsi, M., Bahadur, I.M. and Al-Sabari, M.N. 2014. Preliminary Design and Implementation of a Test Bed for Vibration Control Experiments with a Dynamic Vibration Absorber. In: Proceedings of the International Conference on Engineering and Applied Science (ICEAS), Japan. Hokkaido, 22-24 July 2014.
  37. Pervez, T. and Malik, A.S. 2014. Integrating Teaching of Contemporary Issues into Engineering Education-A Case Study. In: Proceedings of Engineering Leaders Conference on Engineering Education, Doha, Qatar, 9-11 November 2014.
  38. Pervez, T., Khan, R., Al-Abri, O.S. and Qamar, S.Z. 2014. Combined Effects of Transformation and Twinning Induced Plasticity on Mechanical Properties of High-Mn Austenitic Steels. In: Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014-37504, Montreal, Canada, 14-20 November 2014.
  39. Piya, S. and Al-Hinai, N. 2014. Production Planning Under Hierarchical Workforce Environment. In: Lecture Notes in Engineering and Computer Science: Proceedings of the World Congress on Engineering 2014, WCE 2014, London, U.K., 2-4 July, 2014.
  40. Qamar, S.Z. 2014. Heat Treatment Strategy for H11 Tool Steel. In: International Conference on Machining, Materials, and Mechanical Technologies (IC3MT-2014), Taepei, Taiwan, 31 August - 05 September 2014.
  41. Qamar, S.Z., Akhtar, M. and Pervez, T. 2014. Effect of Swelling on Mechanical and Structural Properties of Rubberlike and Biological Materials. In:  International Conference on Machining, Materials, and Mechanical Technologies (IC3MT-2014), Taepei, Taiwan, 31 August - 05 September 2014.
  42. Qamar, S.Z., Akhtar, M. and Pervez, T. 2014. Optimum Heat Treatment of Extrusion Die Steel. In: 4th International Conference on Key Engineering Materials (ICKEM-2014), Bali, Indonesia, 22-23 March 2014.
  43. Qamar, S.Z. and Pervez, T. 2014. Numerical Simulation of Swelling Elastomer Seals in Tubular Expansion Applications. In: Materials Science & Technology 2014 (MS&T-2014), Pittsburgh, USA, 12-16 October 2014.
  44. Qamar, S.Z., Pervez, T. 2014. Pre and Post-Expansion Mechanical Behavior of Expandable Tubulars. In: Materials Science & Technology 2014 (MS&T-2014), Pittsburgh, USA, 12-16 October 2014.
  45. Salem, N.M. and Abdul-Wahab, S.A. 2014. Indoor Air Quality of the Storage of Semi-Active Records in Oman. In: Proceedings of the 3rd Technical Conference on Hydraulic Engineering (CHE 2014). Hong Kong, China, 13-14 December 2014.
  46. Shah Jahan, M., Shamsuzzoha, A. and Chowdhury, H.A. 2014. Determinants of Maternal Delivery-Care Services: Study from Rural Area of Bangladesh. In: 13th Islamic Countries Conference on Statistical Sciences (ICCS-13), Bogor, Indonesia, Vol. 27, pp. 145-156, 18-21 December 2014.
  47. Shamsuzzoha, A., Abels, S., Kuspert, S. and Helo, P. 2014. Smart Collaborative Processes Monitoring in Real-Time Business Environment: Applications of Internet of Things and Cloud-Data Repository. In: Proceedings of the 16th International Conference on Enterprise Information Systems (ICEIS 2014). Lisbon, Portugal, 27-30 April 2014.
  48. Shamsuzzoha, A., Barros, A., Costa, D., Azevedo, A. and Helo, P. 2014. Conceptual Reference Model for Virtual Factory: Potentials for Collaborative Business. In: Proceedings of the 15th IFIP Working Conference on Virtual Enterprises (PRO-VE’14). Amsterdam, Netherlands, 6-8 October 2014.
  49. Shamsuzzoha, A., Filipe, F., Abels, S., Azevedo, A. and Helo, P. 2014. Visualization Functionality of Virtual Factories: An Enhancement to Collaborative Business Process Management. In: Proceedings of the 16th International Conference on Enterprise Information Systems (ICEIS 2014), Lisbon, Portugal, 27-30 April, 2014.
  50. Shamsuzzoha, A., Hao, Y., Helo, P. and Khadem, M.M.R. 2014. Dashboard User Interface for Measuring Performance Metrics: Concept From Virtual Factory Approach. In: Proceedings of the 4th International Conference on Industrial Engineering and Operations Management. Bali, Indonesia, 7-9 January 2014.
  51. Zaier, R. 2014. Rolling Behavior Control for Humanoid Robot using Van Der Pol Oscillator with Reflex Enhancement. In: Proceedings of the 2nd International conference on Innovation Challenges in Multidisciplinary Research & Practice, Malaysia. Kuala Lumpur, (Best Presentation Award), 17-18 December 2014.

 


  1. Abdo, J. and Al-Shabibi, A. 2013. Effect of Nano-ZnO Particles on the Performance of Drilling Fluids at HTHP Conditions. In: 15th European Conference on Applications of Surface and Interface Analysis, ECASIA’13, Sardinia, Italy, 13-18 October 2013.
  2. Abdo, J. and Al-Shabibi. A. 2013. Effect of Lubricity of Drilling Fluids on Lockup of Coiled Tubing in Drilling Operations. In: 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum, Lyon, France, 4-6 September 2013.
  3. Abdo, J., Alzebdeh, K. and Al-Sharji H. 2013. Investigation of Frictional Effects of Buckling Behaviour of Drill String. In: ASME International Mechanical Engineering Congress and Exposition, (IMECE2013), San Diego, California, USA, 15-21 November 2013.
  4. Abdo, J., Haneef, M.D. and Al-Shabibi A. 2013. Effect of Lubricity of Drilling Fluids on Buckling of Coiled Tubing in Drilling Operations. In: 4th International Conference on Integrity, Reliability & Failure, Funchal, Portugal, 23-27 June 2013.
  5. Abdo, J.Haneef, M.D., Al-Sharji H. and Al-Zebdeh, K. 2013. Investigation of Frictional Effects on Buckling Behavior of Drill String. In: ASME International Mechanical Engineering Congress and Exposition, (IMECE2013), San Diego, California, USA, 15-21 November 2013.
  6. Ahmadi, L., Elkamel, A., Yazdanpanah, P., Abdul-Wahab, S.A., Croiset, E., Douglas, P.L. and Entchev, E. 2013. Electricity Generation Planning and Plug-in Hybrid Electric Vehicles: Different Charging Scenarios. In: 44th World Chemistry Congress, IUPAC 2013, Istanbul, Turkey, 11-16 August 2013.
  7. Akhtar, M., Qamar, S.Z. and Pervez, T. 2013. Finite Element Simulation of Swelling Elastomer Simulation in Down-hole Applications. In: ASME International Mechanical Engineering Congress and Exposition, (IMECE2013), San Diego, California, USA, 15-21 November 2013.
  8. Al-Abri, O.S. and Pervez, T. 2013. Analytical, Computational and Experimental Studies of Stick-Slip Phenomenon in Tube Expansion. In: 24th Canadian Congress of Applied Mechanics (CANCAM 2013), Saskatoon, Saskatchewan, Canada, 2-6 June 2013.
  9. Al-Abri, O.S., Pervez, T., Qamar, S.Z. and Khan, R. 2013. Finite Element Formulation for Prediction and Quantification of Stick-Slip Phenomenon in Down-Hole Tubular Expansion. In: ASME International Mechanical Engineering Congress and Exposition, (IMECE2013), San Diego, California, USA, 15-21 November 2013.
  10. Al-Rawahi, N., Zurigat, Y. and Al-Azri, N. 2013. Analysis of Solar Radiation on Horizontal and Inclined Surfaces for Six Different Locations in Oman. In: 24th Canadian Congress of Applied Mechanics (CANCAM ’13), Saskatoon, Saskatchewan, Canada, 2-6 June 2013.
  11. Al-Shabibi, A. and Abdo, J. 2013. Analytical and Numerical Solution for Expandable Tubular. In: 4th International Conference on Integrity, Reliability & Failure, Funchal, Portugal, 23-27 June 2013.
  12. Alzebdeh, K., Al-Shabibi A. and Pervez, T. 2013. Micromechanical Modelling of Two-Dimensional Periodic Cellular Materials. In: ASME International Mechanical Engineering Congress and Exposition, (IMECE2013), San Diego, California, USA, 15-21 November 2013.
  13. Bahadur, I.M. and Mills, J.K. 2013. A Mechanical Perforation Procedure for Embryo Biopsy. In: IEEE/ICME International Conference on Complex Medical Engineering (CME), Beijing, China, 25-28 May 2013.
  14. Bahadur, I.M. and Mills, J.K. 2013. Robust Autofocusing in Microscopy Using Particle Swarm Optimization. In: International Conference on Mechatronics and Automation (ICMA), Takamatsu, Kagawa, Japan, 4-8 August 2013.
  15. Chang, B., Kruger, U., Kustra, R. and Zhang, J. 2013. Canonical Correlation Analysis based on Hilbert-Schmidt Independence Criterion and Centered Kernel Target Alignment. In: 30th International Conference on Machine Learning (ICML2013), Atlanta, U.S.A., 16-21 June 2013.
  16. Husain, A., Kim, J.H. and Kim, K.Y. 2013. Thermal Performance of Silicon-Based Multiple Micro-Jet Impingement Heat Sink. In: Proceedings of the ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, Burlingame, USA, 16-18 July 2013.
  17. Kchaou, M., Elleuch, R., Bakar, A., Lazim, M. and Abdo J. 2013. Experimental Investigations of Disc Brake Squeal using Different Amount of Brass Filler in Brake Lining Materials. In: 5th International Congress Design and Modelling of Mechanical Systems, Djerba, Tunisia, 25-27 March 2013.
  18. Khan, R., Pervez, T., Al-Maharbi, M. and Qamar, S.Z. 2013. Grain Size and Texture Measurement in Tubular Expansion. In: 24th Canadian Congress of Applied Mechanics (CANCAM 2013), Saskatoon, Saskatchewan, Canada, 2-6 June 2013.
  19. Kim, J.H., Husain, A. and Kim, K.Y. 2013. Flow Analysis and Performance Evaluation for Micro-Jet Configurations of a Silicon-Based Heat Sink. In: Proceedings of the KSME Fluid Engineering Division Spring Conference, Jeju, South Korea, 9-10 May 2013.
  20. Ӧzer, A., Al-Hatmi, S., Al-Jadidi A.K., Al-Harrasi, F.M., Al-Sabari, M.N. and Al-Mahrizi, M.S. 2013. Development of a Test Bed for Energy Harvesting from Structural Vibration of a Cantilevered Beam. In: 2nd International Conference on Materials, Energy and Environments (ICMEE), Japan. Yokohama, 8-9 August 2013.
  21. Piya, S. 2013. Mediator Based Negotiations for Order Acceptance Decision. In: 22ndInternational Conference on Production Research, Iguassu Falls, Brazil, 28 July-1 Aug 2013.
  22. Qamar, S.Z., Akhtar. M. and Al-Kharusi, M.S.M. 2013. Effect of Swelling Behavior on Elastomeric Materials: Experimental and Numerical Investigation. In: ASME International Mechanical Engineering Congress and Exposition, (IMECE2013), San Diego, California, USA, 15-21 November 2013.
  23. Qamar, S.Z., Al-Kharushi, M.S.M., Pervez, T. and Akhtar, M. 2013. Elastomer Seal with Frictional Contact - Analytical Solution. In: ASME International Mechanical Engineering Congress and Exposition, (IMECE2013), San Diego, California, USA, 15-21 November 2013.
  24. Triki, C., Al-Alawin, A. and Ghiani, G. 2013. Optimizing the Performance of Complex Maintenance Systems. In: 5th International Conference on Modelling, Simulation and Applied Optimization, Tunisia, 28-30 April 2013.
  25. Triki, C., Oprea, S., Beraldi, P. and Crainic, T.G. 2013. Bid Generation in Combinatorial Auctions for the Transportations Procurement under Stochastic Winning Prices. In: XIII International Conference on Stochastic Programming, Bergamo, Italy, 8-12 July 2013. 

  1. Abdo J. and Haneef, M.D. 2012.  Mitigate Friction of Coiled Tubing by Optimization and Axial Vibrations to Facilitate Extended Reach Drilling Operations. In: ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012, Paper No. IMECE2012-87361, Houston, Texas, USA, 9-15 November 2012.
  2. Abdo J., Haneef, M.D. and Al-Swalhi, M. 2012.  Modified Nanoclays: An approach to Stabilizing Drilling Fluids Rheology at High Temperature. In: Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech, 757-760, 2012.
  3. Haneef, M.D. and Abdo, J. 2012. Growth of ZnO Nanorods in Clay Matrix to Ensure Uniform Dispersion in Drilling Fluids. In: Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech, 652-655, 2012.
  4. Akhtar, M., Qamar, S.Z. and Pervez, T. 2012. Swelling Elastomer Applications in Oil and Gas Industry. In: 16th International Research/Expert Conference -Trends in the Development of Machinery and Associated Technology (TMT-2012). Dubai, UAE, 10-12 September 2012.
  5. Bashir, H., Al-Riyami, A., and Alzebdeh, K. 2012. Obstacles Restraining Productivity Improvement Programs in a Developing Country. In: Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management. Istanbul, Turkey, 3 July 2012.
  6. Mukaddes, M. M., Choudhry, N.F.A., Khadem, M. and Ali, A. 2012.  CNG Refueling Station Distribution on the Intra and Intercity Networks: A Challenge for Energy Efficient Green Highway. In: Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management, Istanbul, Turkey, 3-6 July 2012.
  7. Khadem, M. and Anisul-Islam, M.d.  2012. A Restorative Safety Model for Micro and Small Enterprises. In: Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management, Istanbul, Turkey, 03-06 July 2012.
  8. Al-Azri, N., Zurigat, Y. and Al-Rawahi, N. 2012. Development of Bioclimatic Chart for Passive Building Design in Muscat-Oman. In: International Conference on Renewable Energies and Power Quality (ICREPQ’12), Santiago De Compostela (Spain), 28-30 March, 2012.
  9. Piya, S., Katsuhiko, T. and Katsumi, M. 2011. An Integrated Model of Production Planning and Simultaneous Negotiations for Order Acceptance Decision Environment. In: Proceedings of the 2nd International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia, (in CD-ROM), 22 – 24 January 2011.
  10. Qamar, S.Z. 2012. Fracture Mechanics Based Life Prediction of Hollow Extrusion Dies. In: ASME-2012 International Mechanical Engineering Congress and Exhibition (IMECE), Houston, Texas, 9-15 November 2012.
  11. Qamar, S.Z., Pervez, T., Al-Houqani, S. and Velden, M. 2012. Effect of Cold Work on Mechanical Properties of Expandable Tubulars. In: 16th International Research/Expert Conference, Trends in the Development of Machinery and Associated Technology, (TMT-2012), Dubai, UAE, 10-12 September 2012.
  12. Qamar, S.Z., Pervez. T., Velden, M. and Sanchez, F.J.  2012. Design and Fabrication of Test Facility for Longevity Testing of Elastomer Seals. In: ASME-2012 International Mechanical Engineering Congress and Exhibition (IMECE), Houston, Texas, 9-15 November 2012
  13. Triki, C. 2012. Petrol Station Replenishment: Optimization Models & Solution Methods, In: 11th Biennial Conference of the Indian Society of Industrial and Applied Mathematics (Invited Speaker), Delhi (India), 15-16 December 2012.

 


  1. Abdo, J. 2011. Energy Loss Due to Plastic Interaction at Contact. In: Proceedings of the 14th European Conference on Applications of Surface and Interface Analysis (ECASIA'11). Cardiff, Wales, 4-9 September 2011.
  2. Abdo, J. and Haneef, D. 2011. Nanoparticles for Maturity and Optimization of Rheological Properties of Drilling Fluids. In: Proceedings of the IASTED. Calgary, Canada, 4-6 July 2011.
  3. Alalawin, A., Ghiani, G. and Triki, C. 2011. An Optimization via Simulation Approach for Level of Repair Analysis. In: Proceedings of the 7th International Conference on the Modelling in Industrial Maintenance and Reliability. Cambrige, UK, 18-19 April 2011.
  4. Al-Kharusi, M.S.M., Qamar, S.Z., Pervez, T. and Akhtar, M. 2011. Non-Linear Model for Evaluation of Elastomer Seals Subjected to Differential Pressure. In: Proceedings of the 2011 SPE Saudi Arabia Section/Dhahran Geosciences Society Annual Technical Symposium and Exhibition (Paper # SPE-SAS 1216). Al-Khobar, Saudi Arabia, 15-18 May 2011.
  5. Almeshal, A.M., Tokhi M.O. and Goher K.M. 2011. Modelling of Two Wheeled Robotic Wheelchair with Moving Payload. In: Proceedings of the 14th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR 2011). Paris, France, 6-8 September 2011.
  6. Al-Rawahi, N., Zurigat, Y. and Al-Azri N. 2011. Applications of Different Models for the prediction of hourly solar radiation on horizontal and inclined surfaces. In: Proceedings of the 23rd Canadian Congress of Applied Mechanics (CANCAM ’11). Canada, Vancouver, 5-9 June 2011.
  7. Alzebdeh, K. and Al-Siyabi, M. 2011. A Study of Cost Estimation Practices Prevalent in Constriction Projects in Sultanate of Oman. In: Proceedings of the 16th Annual International Conference on Industrial Engineering Theory, Applications and Practice. Stuttgart, Germany, 20-23 September 2011.
  8. Corredor, R.A.C., Agouri, S.A., Tokhi, M.O. and Goher K.M. 2011. Design and Real -Time PID control Approach of a Two Wheeled Vehicle with an Extended Rod. In: Proceedings of the 14th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR 2011). Paris, France, 6-8 September 2011.
  9. Garbie, I.H. 2011. Design for Reconfiguration as a Requirement of Global Manufacturing. In: Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition (IMECE 2011). Denver, Colorado, USA, 11-17 November 2011.
  10. Garbie, I.H. 2011. Measuring the Agility Level in Petroleum Companies. Proceedings of the 2011 Industrial Engineering Research Conference. Reno, NV, USA, 21-25 May 2011.
  11. Ghiani, G., Laganà, D., Manni, E. and Triki, C. 2011. Capacitated Location of Collection Sites in an Urban Waste Management System. In: Proceedings of the Conference AIRO. Brescia-Italy, 7-11 September 2011.
  12. Islam, A.M., Khadem, M. and Alauddin, M. 2011. An Empirical Assessment of the Relationship Between Service Quality and Customer Satisfaction in Fashion House. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management. Kuala Lumpur, Malaysia, 22-24 January 2011.
  13. Khadem, M. 2011. Transformation to Lean Production system of a Water Heater company in Oman. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management. Kuala Lumpur, Malaysia, 22-24 January 2011.
  14. Mukaddes, M.M.A., Khadem, M., Ali, A. and Shah, K.S. 2011. Developing an Employee Information System for Information Management in a Garment Industry. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management. Kuala Lumpur, Malaysia, 22-24 January 2011.
  15. Ozer, A. and Semercigil, S.E. 2011. Tool Chatter in Turning with a Two-Link Robotic Arm. In: Proceedings of the IMAC-XXIX, International Modal Analysis Conference. Society for Experimental Mechanics (SEM). Orlando, Florida, USA, 31 January-3 February 2011.
  16. Ozer, A. and Yoon, J. 2011. Development of a Multi-channel Active Vibration Isolation Model with Decentralized Velocity Feedback Controller. In: Proceedings of the International Conference on Manufacturing Process Technology. Jinju, Korea, 27-30 May 2011.
  17. Pervez, T. 2011. Issues and Challenges in Expandables and Swellables Research. In: Proceedings of the Expandable Technology Forum. Hamburg, Germany, 22-23 February 2011.
  18. Pervez, T., Khan, R., Qamar, S.Z., Al-Jahwari, F.K., Sanchez F.J. and Al-Abri B. 2011. Post Expansion Characterization of Expandable Tubular: Progress and Challenges. In: Proceedings of the SPE/IADC Middle East Drilling Technology Conference. Muscat, Oman, 24-26 October 2011.
  19. Pervez, T., Qamar, S.Z., Al-Abri, O.S., Velden, M., Al-Houqani, S.A. and Eijden J.V. 2011. Full Scale Testing of Fast Swell Packer for Shallow Aquifer Applications. In: Proceedings of the SPE/IADC Middle East Drilling Technology Conference (Paper # SPE/IADC 148533). Muscat, Oman, 24-26 October 2011.
  20. Piya, S., Katsuhiko, T. and Katsumi, M. 2011. An Integrated Model of Production Planning and Simultaneous Negotiations for Order Acceptance Decision. In: Proceedings of the 2nd International Conference on Industrial Engineering and Operations Management. Kuala Lumpur, Malaysia, 22-24 January 2011.
  21. Qamar, S.Z., Pervez, T. and Al-Moharbi, A.D. 2011. Fracture Prediction of Extrusion Die Modeled as Pressurized Cylinder with Internal Crack. In: Proceedings of the 15th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology” (TMT 2011). Prague, Czech Republic, 12-18 September 2011.
  22. Qamar, S.Z., Pervez, T., Al-Kharusi, M.S.M. and Akhtar, M. 2011. Material Characterization of Water-Swelling and Oil-Swelling Elastomers. In: Proceedings of the 15th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology” (TMT 2011). Prague, Czech Republic, 12-18 September 2011.
  23. Rashid, M. K. 2011. Fuzzy Modeling and RFID to Enhance Drilling Projects Selection. In: Proceedings of the 14th IASTED International Conference on Artificial Intelligence and Soft Computing (ASC 2011). June 2011.
  24. Shikdar, A.A., Garbie, I.H and Khadem, M.K. 2011. Development of a Smart Workstation for an Assembly Task. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management (IEOM 2011). Kuala Lumpur, Malaysia, 22-24 January 2011.
  25. Shikdar, A.A., Garbie, I.H. and Khadem, M.K. 2011. Development of a Smart Workstation for an Assembly Task. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management. Kuala Lumpur, Malaysia, 22-24 January 2011.
  26. Tahri, T., Douani, M., Bettahar, A., Abdul-Wahab, S.A. and Amoura, M. 2011. Comparison between two models in predicting the condensation vapor mixture in the condenser of seawater greenhouse. In: Proceedings of the 7th International Conference on Computational Heat and Mass Transfer (ICCHMT). Turkey, Istanbul, 18-22 July 2011.

27.    Zaier, R. 2011. Bio-Inspired Locomotion Controller Design for Legged Robots. In: Proceedings of the 14th International Conference on Climbing and Walking Robots. Paris, France, 6-8 September 2011.